Brand: ATORN
Art.-no. 23692449
Manufacturer article no. 20800012
EAN 4050293200836
Individual prices for customers after login
Application
For screwing into tool holders. They differ depending on the machine and spindle type and are used to fix the holders in the machine spindle.
Execution
- All pull studs made from material 16Mn Cr5
- Case-hardened HRC 58 ±2
- Thread and bore hole ground with soft, black-oxide finish
- Pull stud with O-ring = sealed
Brand | ATORN |
Suitable for tool holding device | SK 40 |
Design | With O-ring |
Angle (α/ A) | 90 Degree |
Last viewed
ORION twist drill N HSS, roll forged, DIN 338, 6.5 mm x 101 mm x 63 mm, 118°
HOFE additional shelf 750x300 mm, zp., 150 kg load
ORION SC end mill XL teeth=3 D 10.0 x 45 x 95mm 30 degrees HA shaft TiAlN
ATORN screw-in jaw, smooth 120 mm
ATORN indexable drilling insert SOLX 050204 ACM40D
APFEL vertical cabinet HxWxD 2140x1040x1050 mm w 50 storage trays RAL 7016/9002
ATORN chamfer and centring cutter, 30°, diameter 16.0 x 120 mm
ATORN SC TiAlNplus high-feed drill, 3xD diameter 5.1 mm, HA shaft, with IC
HERMANN BILZ pilot with thread, size 4, 10 mm x 12 mm x 88 mm
ATORN solid carbide slotting cutter T=2 3.80 mm shaft DIN 6535 HB