AMF gripper without counterbalance unit, hydraulic L5=80 40 bar

Application

The gripper performs fully automatic workpiece replacement during the machining process on a machine tool. The change is performed from the machine tool of the milling machine and facilitates workpiece handling between the parts storage and clamping device.
It is actuated by coolant, which is routed through the machine spindle. The gripper closes hydraulically and opened using spring force.

Execution

• Max. permissible rotation speed: 20 [rpm].
• Suitable for Weldon mounting and hydraulic expansion chucks.
• Designed for ambient temperatures between 0°C and 60°C.
• Transport of workpieces up to max. 8 kg.
• Available in two versions for workpiece sizes up to max. 50 mm or max. 70 mm.

Advantage

• The gripping force can easily be adjusted using inductors and adapted to the respective requirements of the workpiece in this way.
• Easily exchangeable gripper inserts for handling different workpiece geometries.
• Easy implementation of unmanned shifts and therefore higher machine utilisation and greater flexibility.
• Considerably reduced setup times for small to medium-sized batches.

Notes

Depending on the machine used and the operating pressure of the coolant, three pre-configured grippers are available. During use, please observe the minimum and maximum operating pressures.

Delivery

1x hydraulic gripper with counterbalance unit.