LET´S WORK TOGETHER.   Welcome to HAHN+KOLB France | For commercial customers only
ATORN 180° high-performance drill, SC TiAlN, 5xD 4.1 mm x 6 mm x 74 mm - 180° high-performance drill bit, solid carbide TiAlN 5xD with internal cooling ATORN 180° high-performance drill, SC TiAlN, 5xD 4.1 mm x 6 mm x 74 mm - 180° high-performance drill bit, solid carbide TiAlN 5xD with internal cooling ATORN 180° high-performance drill, SC TiAlN, 5xD 4.1 mm x 6 mm x 74 mm - 180° high-performance drill bit, solid carbide TiAlN 5xD with internal cooling ATORN 180° high-performance drill, SC TiAlN, 5xD 4.1 mm x 6 mm x 74 mm - 180° high-performance drill bit, solid carbide TiAlN 5xD with internal cooling ATORN 180° high-performance drill, SC TiAlN, 5xD 4.1 mm x 6 mm x 74 mm - 180° high-performance drill bit, solid carbide TiAlN 5xD with internal cooling
ATORN 180° high-performance drill, SC TiAlN, 5xD 4.1 mm x 6 mm x 74 mm - 180° high-performance drill bit, solid carbide TiAlN 5xD with internal cooling - 1
ATORN 180° high-performance drill, SC TiAlN, 5xD 4.1 mm x 6 mm x 74 mm - 180° high-performance drill bit, solid carbide TiAlN 5xD with internal cooling - 2
ATORN 180° high-performance drill, SC TiAlN, 5xD 4.1 mm x 6 mm x 74 mm - 180° high-performance drill bit, solid carbide TiAlN 5xD with internal cooling - 3
ATORN 180° high-performance drill, SC TiAlN, 5xD 4.1 mm x 6 mm x 74 mm - 180° high-performance drill bit, solid carbide TiAlN 5xD with internal cooling - 4
ATORN 180° high-performance drill, SC TiAlN, 5xD 4.1 mm x 6 mm x 74 mm - 180° high-performance drill bit, solid carbide TiAlN 5xD with internal cooling - 5
ATORN

ATORN 180° high-performance drill, SC TiAlN, 5xD 4.1 mm x 6 mm x 74 mm

Brand: ATORN

Surface: TiAlN

Length: 74 mm

Art.-no. 11168212

Manufacturer article no. 12040482

EAN 4050293447118

All versions


Individual prices for customers after login

You need more information or have not found your desired product?

Application

For producing drill holes with a 180° hole base in one operation

Execution

  • Heavy-duty solid carbide drill with 180° precision grinding and drill heels
  • Recommended pilot drill bits under art. no. 11181.

Advantage

  • drilling and counterboring in a single work step at high cutting speed
  • Innovative geometry ensures good chip removal

Notes

The maximum permissible inclination of the drilling surface is 15° correction factor = 0.25
For spot drilling, multiply feed f [mm/U] by correction factor Kf

  • Spot drill with reduced feed until the tool cuts to 0.25xD over the total ø

  • For angled spot drilling: Retract at double feed rate f [mm/U]

  • After spot drilling at reduced feed rate (correction factor), drilling continues at feed rate f [mm/U] according to recommended cutting data without correction factors

  • Setting a pilot hole is recommended for drilling on flat surfaces.

Product information

HAHN+KOLB Catalogue

CAD data (available after login)

Certificates/ Documents

 | 

 | 

Brand

ATORN

Main EAN Code

4050293447118

Manufacturer Part Number

12040482

Cutting material

SC

Surface

TiAlN

Max. drilling depth (D)

5xD

Angle of the tip

180 Degree

Coolant supply

Internal

Tool holding device

HA parallel shank

Cutting edge diameter

4.10 mm

Shank diameter

6 mm

Chip flute length

36 mm

Length

74 mm

f steel 1000

0.08 mm/r

Edge protection chamfer length

0.21 mm

Gross Weight

0.022 kg

Material groups for cutting valuesDescription regarding DINStrength Class [N/mm²]Material No.Vc [m/min]f [mm/r] with diameterSuitability
1.00 Steels
1.01 Free machining steel9 S 20< 9001.071170-1000.08-0.14⚫
1.02 Structural steelST 37-2<5001.003770-950.08-0.14⚫
1.03 Structural steelST 60-2> 5001.773570-900.08-0.14⚫
1.04 Heat-treated steel42 CrMo 4<10001.722560-700.08-0.14⚫
1.05 Cast ironGS-45<10001.044650-700.06-0.12⚫
1.06 Case-hardened steel16 MnCr 5<12001.713140-500.06-0.12⚫
1.07 Ferritic/martensitic stainless steelX 10 Cr 13<11001.4006 - - ⚪
1.08 Heat-treated steel43 CrMo 4>10001.356340-500.06-0.12⚫
1.09 Nitriding steel31 CrMoV 9<13001.851940-500.06-0.12⚫
1.10 Tool steelX 38 CrMoV 5 1<13001.234340-500.08-0.12⚫
3.00 Non-ferrous metals
3.01 Long-chipping aluminiumAI99.9<5003.0305100-2500.18-0.25⚪
3.02 Short-chipping aluminiumG-AISi12<5003.2581100-2000.18-0.25⚫
3.03 Copper alloy bronze, long-chippingCuSn4<12002.1016100-1500.18-0.25⚪
3.04 Copper alloy bronze, short-chippingCuNi12Zn24<8502.0730100-1800.18-0.25⚫
3.05 Copper alloy brass, long-chippingCu Zn 20<6002.0250100-1500.18-0.25⚪
3.07 ThermoplasticCu Zn 39 Pb 3<6002.0381100-1800.18-0.25⚫
3.07 ThermoplasticPVC, Acrylglas<100 - -
3.08 DuroplastBakelit, Melamin<150 - -
3.09 Fibre-reinforced plasticsCFK, GFK<1500 - -
3.10 GraphiteC8000<60 - -
3.11 Composite materials - -
4.00 Cast metal
4.01 Grey cast ironGG10<260 HB0.601060-1000.08-0.14⚫
4.02 Spheroidal graphite ironGGG 40<310 HB0.704060-1000.08-0.14⚫
4.03 Ductile ironGTW-55<280 HB0.805560-1000.08-0.14⚫

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

HAHN+KOLB Catalogue

CAD data (available after login)

Certificates/ Documents

 | 

 | 

Technical information
Show all product details