ATORN 3-blade solid carbide drill, diameter 9.8 mm straight shank HA
Brand: ATORN
Surface: Uncoated
Length: 89 mm
DIN: 6539
Art.-no. 11164098
Manufacturer article no. 10473091
EAN 4050293039764
Individual prices for customers after login
Application
special geometry with 3 cutting edges for precise position and shape drilling into the main body.
Execution
- SC drill bit, 3-edge, uncoated, for machining steels up to 1000 N/mm²
Advantage
- Special geometry with three cutting edges: Innovative cutting geometry for precise position and shape drilling into the main body
Brand | ATORN |
Main EAN Code | 4050293039764 |
Manufacturer Part Number | 10473091 |
Cutting material | SC |
Surface | Uncoated |
Max. drilling depth (D) | 5xD |
Angle of the tip | 150 Degree |
Coolant supply | External |
Tool holding device | HA parallel shank |
Number of cutting edges | 3 PCS |
Cutting edge diameter | 9.80 mm |
Shank diameter | 9.8 mm |
Chip flute length | 55 mm |
Length | 89 mm |
f steel 1000 | 0.18 mm/r |
DIN | 6539 |
Gross Weight | 0.069 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | f [mm/r] with diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 60-90 | 0.15-0.25 | ⚪ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 65-90 | 0.15-0.25 | ⚪ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 50-75 | 0.14-0.23 | ⚪ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 50-60 | 0.14-0.23 | ⚪ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 50-65 | 0.14-0.23 | ⚪ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 40-55 | 0.12-0.19 | ⚪ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 22-35 | 0.12-0.18 | ⚪ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 35-50 | 0.12-0.18 | ⚪ |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 35-45 | 0.12-0.18 | ⚪ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 25-35 | 0.12-0.18 | ⚪ |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 20-35 | 0.12-0.18 | ⚪ |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 140-200 | 0.19-0.3 | ⚪ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 100-200 | 0.15-0.25 | ⚪ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 50-65 | 0.15-0.25 | ⚪ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 45-60 | 0.15-0.25 | ⚪ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 60-140 | 0.19-0.3 | ⚪ |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 70-120 | 0.19-0.3 | ⚪ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 30-65 | 0.19-0.3 | ⚪ | |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 25-55 | 0.19-0.3 | ⚪ | |
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | 25-50 | 0.15-0.25 | ||
| 3.10 Graphite | C8000 | <60 | - | - | ||
| 3.11 Composite materials | - | - | ||||
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 70-80 | 0.19-0.3 | ⚪ |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 70-80 | 0.19-0.3 | ⚪ |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 70-80 | 0.19-0.3 | ⚪ |
Last viewed
ATORN mini cutting insert ATR 5.0mm R0.05 L15 HW5615
ATORN solid carbide drill UNI TiAlNplus 3xD with IC 3.0 mm straight shank HB
BOSCH GSA 18 V-Li 18 V cordless sabre saw bare unit in L-BOXX
ORION high-perf. drill, SC TiAlN, HPC 5xD 10.1 mm x 12 mm x 118 mm HB internal
ATORN cylinder wire brush 100 mm diameter, hole 20 mm crimped V2A wire 0.3 mm
ATORN solid carbide mini end mill diameter 3.0 x 4.5 x 10 x 50 mm, HA shaft
KLINGSPOR FS 764 fibre discs, grain 60, 115 x 22 mm
ATORN sliding block long M12
HOFE large-compartment rack basic bay 2,500x800 mm, 3 zp. steel shelves
ATORN twist drill TLP HSSE-TiAlN, DIN 1897, 5.1 mm x 62 mm x 26 mm, 130°