ATORN HPC POWER SC end mill, STAINLESS STEEL, 12.0x12x26x73 mm HB, VA short
Brand: ATORN
Surface: ULTRA M
Length: 73 mm
Art.-no. 16855212
Manufacturer article no. 10617298
EAN 4050293410754
Individual prices for customers after login
Application
HPC end mill for machining rust- and acid-proof steels and titanium and nickel-based alloys, optimal application in trochoidal milling and in edge, corner and groove machining.
Execution
- Solid carbide ultra-fine grain
- ULTRA M high-performance coating
- Centre cutting
- Uneven twist angle: 41°/44°
- Unequal cutting edge pitch
- Optimised cutting edge design
- With clearance
- Cutting edge with edge preparation
Advantage
- Increased material removal rate
- High process reliability owing to robust cutting edges
- Higher feed rates and cutting depths possible
- Reduces vibrations
- Ideal for static and dynamic trochoidal milling
 | |
Brand | ATORN |
Main EAN Code | 4050293410754 |
Manufacturer Part Number | 10617298 |
Cutting material | SC |
Surface | ULTRA M |
Type | VA |
Number of cutting edges (Z) | 4 PCS |
Twist angle | 41° |
Tool holding device | HB parallel shank |
Construction length | Short |
Cutting edge diameter | 12 mm |
Cutting edge length | 12 mm |
Clearance length | 26 mm |
Length | 73 mm |
Clearance diameter | 11 mm |
Shank diameter | 12 mm |
fz stainless steel | 0.09 mm |
Gross Weight | 0.113 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | - | ||
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | - | ||
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | - | ||
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | - | ||
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | - | ||
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | - | ||
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 100-110 | 0.1 | ⚫ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | - | ||
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | - | ||
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | - | ||
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 100-110 | 0.07 | ⚫ |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | - | ||
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 300-330 | 0.16 | ⚪ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | - | ||
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 220-240 | 0.12 | ⚪ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | - | ||
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 250-280 | 0.14 | ⚪ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | - | |||
| 3.08 Duroplast | Bakelit, Melamin | <150 | - | |||
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | - | |||
| 3.10 Graphite | C8000 | <60 | - | |||
| 3.11 Composite materials | - | |||||
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 80-90 | 0.09 | ⚫ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 40-50 | 0.09 | ⚫ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 30-40 | 0.07 | ⚫ |
Last viewed
ORION SC end mill teeth=3 diameter 16.0x32x92mm 45 degrees HB shaft TiAlN
SIS LIGHT SOLUTIONS flexible arm LED machine lamp IP 54 integ. operating device
ANKE workbench model 283 V, panel, univ. coating, 2000x700x900 mm, RAL 7035/5010
ATORN SC single-tooth milling cutter HP UC diameter 3.0 x 6 x 12 x 64 mm
ATORN solid carbide slotting cutter T=2 1.50 mm shaft DIN 6535 HA
ATORN twist drill N HSS, steam-treated, DIN 340, 4.1 mm x 119 mm x 78 mm, 118°
ATORN SC mini end mill, long, diameter 0.4 x 0.6 x 4 x 50 mm T=2 RT52
ATORN bandsaw blade bi-metal UNI M42 2750 x 27 x 0.9 mm 3/4
ORION high-perf. drill bit SC TiNAlOX HPC 3xD 4.7 x 6 x 66 mm HB shank with IC
DIEBOLD clamping force tester HSK 32 A/C/E