ATORN HPC POWER SC end mill, STAINLESS STEEL, 16.0x32x44x92mm HB, VA long, IC
Brand: ATORN
Surface: ULTRA M
Length: 92 mm
Art.-no. 16855416
Manufacturer article no. 10617313
EAN 4050293410907
Individual prices for customers after login
Application
HPC end mill for machining rust- and acid-proof steels and titanium and nickel-based alloys, optimal application in trochoidal milling and in edge, corner and groove machining.
Execution
- Solid carbide ultra-fine grain
- ULTRA M high-performance coating
- Centre cutting
- Uneven twist angle: 41°/44°
- Unequal cutting edge pitch
- Optimised cutting edge design
- With clearance
- Cutting edge with edge preparation
- With internal cooling
Advantage
- Increased material removal rate
- High process reliability owing to robust cutting edges
- Higher feed rates and cutting depths possible
- Reduces vibrations
- Ideal for static and dynamic trochoidal milling
 | |
Brand | ATORN |
Main EAN Code | 4050293410907 |
Manufacturer Part Number | 10617313 |
Cutting material | SC |
Surface | ULTRA M |
Type | VA |
Number of cutting edges (Z) | 4 PCS |
Twist angle | 41° |
Tool holding device | HB parallel shank |
Construction length | Normal |
Cutting edge diameter | 16 mm |
Cutting edge length | 32 mm |
Clearance length | 44 mm |
Length | 92 mm |
Clearance diameter | 15 mm |
Shank diameter | 16 mm |
fz stainless steel | 0.11 mm |
Gross Weight | 0.224 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | - | ||
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | - | ||
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | - | ||
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | - | ||
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | - | ||
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | - | ||
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 100-110 | 0.13 | ⚫ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | - | ||
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | - | ||
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | - | ||
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 100-110 | 0.09 | ⚫ |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | - | ||
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 300-330 | 0.21 | ⚪ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | - | ||
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 220-240 | 0.16 | ⚪ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | - | ||
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 250-280 | 0.18 | ⚪ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | - | |||
| 3.08 Duroplast | Bakelit, Melamin | <150 | - | |||
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | - | |||
| 3.10 Graphite | C8000 | <60 | - | |||
| 3.11 Composite materials | - | |||||
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 80-90 | 0.11 | ⚫ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 40-50 | 0.11 | ⚫ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 30-40 | 0.09 | ⚫ |
Last viewed
ORION HPC multi-tooth mill, torus, short cutter, D 3.0x3x4x50mm, HA shaft, r=0.3
PARAT change holder WDPL 2/25
ATORN indexable insert countersink, single-edge cutter CC..09 32.0 mm HB
ATORN twist drill TLP HSSE, DIN 338, type GS, 2.65 mm x 57 mm x 30 mm, 130°
LEITECH thread test arbour, M 10 x 1.25 - 6H, with digital readout 0.01 mm
ATORN tube brush 15 mm, crimped steel wire, M6, length 115 mm
HK undercounter cab. GS 8, 800x570x680 mm w. 8 fully ext. drawers, RAL 7035/5010
ATORN ER25 HP collet dia. 11.5 mm metallic-sealed, concentricity 5 µm
ORION thread limit plug gauge DIN 2280 M 14x1.25 ISO 6H
LISTA workbench 27x36E 3 drawers 1500x750x890 mm multiplex RFID lock R5012