ATORN HPC drill and plunge mill, 5.7x13x19.6x57, T3, HB shank, ULTRA-coated
Brand: ATORN
Surface: ULTRA
Length: 57 mm
Art.-no. 16861560
Manufacturer article no. 10487943
EAN 4066107042776
Individual prices for customers after login
Application
Ramping, grooving, drilling, roughing and finishing with maximum performance. The special end face geometry allows for ramp angles up to 45° and drilling up to 2xD without a piloting tool. The optimised geometry and carbide material, which is ideal for the operating conditions, ensure optimal chip removal and tool stability.
Execution
- End face geometry for ramping and drilling
- Solid carbide ultra-fine grain
- ULTRA-coated
- Centre cutting and clearance
- with 45° edge protection chamfer
- unequal helix angle
Advantage
- for less powerful machines and unstable clamping conditions
- for lathes and driven tools
- ideal for grooving with smaller mill diameters
Brand | ATORN |
Main EAN Code | 4066107042776 |
Manufacturer Part Number | 10487943 |
Cutting material | SC |
Surface | ULTRA |
Type | N |
Number of cutting edges (Z) | 3 PCS |
Tool holding device | HB parallel shank |
Construction length | Normal |
Cutting edge diameter | 5.7 mm |
Cutting edge length | 13 mm |
Clearance length | 19.6 mm |
Length | 57 mm |
Edge protection chamfer length | 0.09 mm |
Clearance diameter | 5.5 mm |
Shank diameter | 6 mm |
fz steel 1000 | 0.05 mm |
Gross Weight | 0.021 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | ft [mm/T] for diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 90-100 | 0.04-0.05 | ⚫ |
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 180-200 | ⚫ | |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 90-100 | 0.04-0.05 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 200-220 | ⚫ | |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 70-90 | 0.04-0.05 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 180-200 | ⚫ | |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 70-80 | 0.04-0.05 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 180-210 | ⚫ | |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 60-70 | 0.04-0.05 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 55-70 | 0.04-0.05 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 150-175 | ⚫ | |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 40-50 | 0.04-0.05 | ⚫ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 70-90 | ⚫ | |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 50-60 | 0.02-0.03 | ⚫ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 150-175 | ⚫ | |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 60-80 | 0.04-0.05 | ⚫ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 30-60 | 0.04-0.05 | ⚫ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 100-130 | ⚫ | |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 40-50 | 0.02-0.03 | ⚫ |
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 90-120 | ⚫ | |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 400-500 | 0.04-0.06 | ⚫ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 400-500 | 0.04-0.06 | ⚫ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 100-130 | 0.02-0.04 | ⚫ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 100-130 | 0.02-0.04 | ⚫ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 150-200 | 0.02-0.04 | ⚫ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 100-120 | 0.02-0.04 | ||
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 140-150 | 0.02-0.04 | ⚫ |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 100-120 | 0.02-0.04 | ||
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | 80-100 | 0.02-0.04 | ||
| 3.10 Graphite | C8000 | <60 | - | - | ||
| 3.11 Composite materials | - | - | ||||
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 80-120 | 0.04-0.05 | ⚫ |
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 120-150 | ⚫ | |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 80-120 | 0.04-0.05 | ⚫ |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 90-100 | ⚫ | |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 80-120 | 0.04-0.05 | ⚫ |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 90-110 | ⚫ | |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 35-50 | 0.01-0.02 | ⚪ |
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 60-70 | ⚪ | |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 30-40 | 0.01-0.02 | ⚪ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 30-40 | 0.01-0.02 | ⚪ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 40-50 | ⚪ | |
| 6.00 Hard materials | ||||||
| 6.01 Hardened steel -55 HRC | x40CrMoV5-1 | -55HRC | 0.9620 | 20-40 | 0.02-0.03 | ⚪ |
| 6.02 Hardened steel -65 HRC | 90MnCrV8 | <65HRC | 20-40 | 0.02-0.03 | ||
Last viewed
METABO KFM 9-3 RF bevelling tool for metal 900 W in MetaLoc case
WIDIA Top Cut 4 indexable inserts, external V36 TCF070306CPV36 WU40PH
AUTOSTAT 77002630 spring load capacity 13.0-17.0 kg original spare part
ATORN solid carbide drill UNI TiAlNplus 3xD with IC 20.0 mm straight shank HB
ATORN TC indexable insert CNMG 120408-FP1 ACP15T
HAKRO men's Cotton Tec polo shirt, red, size XS
LISTA drawer cabinet with 4 drawers 36x36E 717x753x1020 mm KEY lock R7035
PRO FIT shoe covers
ATORN cemented carbide indexable insert DNMG 150608-MS1 APS15T