ATORN Hurco SK40 pull stud A60° without bore
Brand: ATORN
Length: 57.15 mm
Art.-no. 23693083
Manufacturer article no. 20803273
EAN 4050293569636
Individual prices for customers after login
Application
For screwing into tool holders. They differ depending on the machine and spindle type and are used to fix the holders in the machine spindle.
Execution
- All pull studs made from material 16Mn Cr5
- Case-hardened HRc 58 ± 2
- Thread and bore hole soft, black oxide and polished
- Pull studs with O-ring = sealed
Notes
Further versions available on request (specification of machine types required).
Delivery
1x Hurco SK40 pull stud
Brand | ATORN |
Suitable for tool holding device | SK 40 |
Design | With O-ring |
Outer diameter (D1) | 10 mm |
Bolt diameter (D2) | 17 mm |
Diameter (D) | 15 mm |
Length (L) | 57.15 mm |
Coolant supply | No |
Angle (α/ A) | 60 Degree |
Length of tenon (L1) | 32 mm |
Certificates/ Documents (1)
Last viewed
ATORN clamping rail set L400 80 mm allowance
BOSCH GFR 18V-23 cordless brush cutter, cutting diameter 33 cm
ATORN indexable insert, negative, CNMG 120408-FP HC7620
TESTO NTC food sensor 0613 2211, measuring range -50 to 150 degrees
ARIANA 1/4" round nozzle set, diameter 3.2 - 4 pieces
EICHINGER swarf bin w/ screen plate ins. and valve 1,000 kg 300 l batch hdg
ATORN countersink, 100°, HSS, T=3, 25.00 x 65 mm, straight shank
TESATAST plexiglas container for measuring probe type Y60/6
ATORN twist drill NV HSSE-TiN, DIN 1897, 6.5 mm x 70 mm x 31 mm, 130°
ATORN hand tap VS HSSE A 352 0° M20 2.5 mm ISO2 D/S 3xD VA