ATORN Hurco SK40 pull stud A90° with bore 4 mm
Brand: ATORN
Length: 57.15 mm
Art.-no. 23693084
Manufacturer article no. 20803274
EAN 4050293569643
Individual prices for customers after login
Application
For screwing into tool holders. They differ depending on the machine and spindle type and are used to fix the holders in the machine spindle.
Execution
- All pull studs made from material 16Mn Cr5
- Case-hardened HRc 58 ± 2
- Thread and bore hole soft, black oxide and polished
- Pull studs with O-ring = sealed
Notes
Further versions available on request (specification of machine types required).
Delivery
1x Hurco SK40 pull stud
Brand | ATORN |
Suitable for tool holding device | SK 40 |
Design | With O-ring |
Outer diameter (D1) | 10 mm |
Bolt diameter (D2) | 17 mm |
Diameter (D) | 15 mm |
Length (L) | 57.15 mm |
Coolant supply | Yes |
Angle (α/ A) | 90 Degree |
Length of tenon (L1) | 32 mm |
Last viewed
SATAjet 5000 B RP 1.2 nozzle set
CP abrasive discs w. hk-and-lp bckng f. CP7200 and CP7200S diam. 50mm-grain 400
ATORN solid carbide drill UNI TiAlNplus 8xD with IC 13.5 mm
Shelf 700 S 100% full extension WxD 600x600 mm
HOFE additional shelf 750x600 mm, light grey 90 kg load, incl. supports
AMF conical washers DIN 6319 G for M 16 screws
SATA 584 three-stage filter, 1/4 inch external thread, 1/2 inch internal thread
ATORN indexable insert, CBN, coated, CCGW 060208 ABC25B/D S2
PFERD flap wheel, CO-COOL ceramic abrasive grain, 60 x 30 mm, G 120, dia. 6 mm
HAKRO women's Coolmax polo shirt, ink, size XL