ATORN SC HPC end mill diameter 10.0 x 22 x 32 x 72 mm, HA shaft
Brand: ATORN
Surface: ULTRA MS
Length: 72 mm
Art.-no. 16670284
Manufacturer article no. 11861073
EAN 4050293359978
Individual prices for customers after login
Application
HPC end mill with uneven helical and uneven pitch for rough machining and finish machining of stainless steel, titanium alloy, nickel and copper alloys. The uneven helical pitch means that vibrations on the tool are reduced, which results in outstanding finished surfaces, while, at the same time, feed rates and cutting depths can be increased.
Execution
- ultra-fine grain cemented carbide
- with uneven helical and cutter distribution (35/38°)
- HA straight shank
- with clearance
- high-performance ULTRA MS layer
- with edge protection chamfer
- defined cutting edge rounding
- centre cutting
Advantage
- rough machining and finishing with just one tool
- optimum suitability for trochoidal milling
- HPC geometry for maximum feed rates and running smoothness
- suitable for large cutting depths
Brand | ATORN |
Main EAN Code | 4050293359978 |
Manufacturer Part Number | 11861073 |
Cutting material | SC |
Surface | ULTRA MS |
Type | VA |
Number of cutting edges (Z) | 4 PCS |
Twist angle | 35° |
Tool holding device | HA parallel shank |
Construction length | Normal |
Cutting edge diameter | 10 mm |
Cutting edge length | 22 mm |
Clearance length | 32 mm |
Length | 72 mm |
Edge protection chamfer length | 0.2 mm |
Clearance diameter | 9.2 mm |
Shank diameter | 10 mm |
fz stainless steel | 0.044 mm |
Gross Weight | 0.074 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 120-140 | 0.055 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 130-150 | 0.055 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 130-150 | 0.055 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 120-140 | 0.055 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 120-140 | 0.055 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | - | ⚫ | |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | - | ⚫ | |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | - | ||
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | - | ||
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | - | ||
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 60-80 | 0.048 | ⚫ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 60-80 | 0.06 | ⚫ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 60-80 | 0.048 | ⚫ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 60-80 | 0.06 | ⚫ |
Last viewed
ATORN screwdriver bit with 1/4 inch hexagon socket ball 5 mm length 100 mm
APFEL 1125 set PC working island, WxHxD 1040x2500x140 mm frame RAL 5010
ATORN indexable insert SNMG 120412-FP1 HC7625
AMF hook wrench with pin, 68-75 mm, DIN 1810 B
ATORN screw tap HSSE C 371 15° M3 0.5 mm ISO2 S 2.5xD CNC conv. P
ORION high-perf. drill, SC TiAlN, HPC 5xD 10.9 mm x 12 mm x 118 mm HB external
LISTA Hinged door 78E (WxDxH) 1378x50x1000mm R7035
ORION collet chuck, sealed, ER25 clamping diameter 10.0 mm
Cantilever basic sh. IPE140 single-sid. 2500x1300x800 RAL 5010 w. 4 cantil./rack
WALTER D3120 indexable insert drill 2xD 38.0 mm x 186 mm internal