ATORN SC HPC end mill diameter 10.0 x 22 x 32 x 72 mm, HB shaft
Brand: ATORN
Surface: ULTRA MS
Length: 72 mm
Art.-no. 16670268
Manufacturer article no. 11861065
EAN 4050293359893
Individual prices for customers after login
Application
HPC end mill with uneven helical and uneven pitch for rough machining and finish machining of stainless steel, titanium alloy, nickel and copper alloys. The uneven helical pitch means that vibrations on the tool are reduced, which results in outstanding finished surfaces, while, at the same time, feed rates and cutting depths can be increased.
Execution
- ultra-fine grain cemented carbide
- with uneven helical and cutter distribution (35/38°)
- HB straight shank
- with clearance
- high-performance ULTRA MS layer
- with edge protection chamfer
- defined cutting edge rounding
- centre cutting
Advantage
- rough machining and finishing with just one tool
- optimum suitability for trochoidal milling
- HPC geometry for maximum feed rates and running smoothness
- suitable for large cutting depths
Brand | ATORN |
Main EAN Code | 4050293359893 |
Manufacturer Part Number | 11861065 |
Cutting material | SC |
Surface | ULTRA MS |
Type | VA |
Number of cutting edges (Z) | 4 PCS |
Twist angle | 35° |
Tool holding device | HB parallel shank |
Construction length | Normal |
Cutting edge diameter | 10 mm |
Cutting edge length | 22 mm |
Clearance length | 32 mm |
Length | 72 mm |
Edge protection chamfer length | 0.2 mm |
Clearance diameter | 9.2 mm |
Shank diameter | 10 mm |
fz stainless steel | 0.044 mm |
Gross Weight | 0.074 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 120-140 | 0.055 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 130-150 | 0.055 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 130-150 | 0.055 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 120-140 | 0.055 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 120-140 | 0.055 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | - | ⚫ | |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | - | ⚫ | |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | - | ||
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | - | ||
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | - | ||
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 60-80 | 0.048 | ⚫ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 60-80 | 0.06 | ⚫ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 60-80 | 0.048 | ⚫ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 60-80 | 0.06 | ⚫ |
Last viewed
ATLAS safety boots RUNNER 105, S3, size 41
ATORN solid carbide drill UNI TiAlNplus 5xD with IC 18.0 mm straight shank HA
FAHRION precision collet, DIN ISO 15488-B16 426E 5.00 RD GERC16-HP Protect
RHODIUS extra-thin cutting disc 115 x 1 x 22.2 mm, straight
DAkkS calibration thread limit plug gauge set, 7 pieces
ORION twist drill N HSS, steam-treated, DIN 338, 1.3 mm x 38 mm x 16 mm, 118°
TSCHORN zero adjustment device, mechanical, magnet
EROGLU precision power chuck SK50 EKS20 A130
ORION twist drill VA HSSE, DIN 338, 1.1 mm x 36 mm x 14 mm, 130°
ANKE workbench model 410 V 1500x700x900 mm panel zinc sheet coat., RAL 7035/7016