ATORN SC HPC end mill diameter 4.0 x 11 x 20 x 57 mm, HA shaft
Brand: ATORN
Surface: ULTRA MS
Length: 57 mm
Art.-no. 16670276
Manufacturer article no. 11861069
EAN 4050293359930
Individual prices for customers after login
Application
HPC end mill with uneven helical and uneven pitch for rough machining and finish machining of stainless steel, titanium alloy, nickel and copper alloys. The uneven helical pitch means that vibrations on the tool are reduced, which results in outstanding finished surfaces, while, at the same time, feed rates and cutting depths can be increased.
Execution
- ultra-fine grain cemented carbide
- with uneven helical and cutter distribution (35/38°)
- HA straight shank
- with clearance
- high-performance ULTRA MS layer
- with edge protection chamfer
- defined cutting edge rounding
- centre cutting
Advantage
- rough machining and finishing with just one tool
- optimum suitability for trochoidal milling
- HPC geometry for maximum feed rates and running smoothness
- suitable for large cutting depths
Brand | ATORN |
Main EAN Code | 4050293359930 |
Manufacturer Part Number | 11861069 |
Cutting material | SC |
Surface | ULTRA MS |
Type | VA |
Number of cutting edges (Z) | 4 PCS |
Twist angle | 35° |
Tool holding device | HA parallel shank |
Construction length | Normal |
Cutting edge diameter | 4 mm |
Cutting edge length | 11 mm |
Clearance length | 20 mm |
Length | 57 mm |
Edge protection chamfer length | 0.1 mm |
Clearance diameter | 3.7 mm |
Shank diameter | 6 mm |
fz stainless steel | 0.02 mm |
Product Group | 1HJ |
Gross Weight | 0.018 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 120-140 | 0.025 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 130-150 | 0.025 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 130-150 | 0.025 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 120-140 | 0.03 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 120-140 | 0.03 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | - | ⚫ | |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | - | ⚫ | |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | - | ||
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | - | ||
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | - | ||
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 60-80 | 0.02 | ⚫ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 60-80 | 0.025 | ⚫ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 60-80 | 0.022 | ⚫ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 60-80 | 0.025 | ⚫ |
Last viewed
ATORN high-perf. SC drill ULTRA M HPC 3xD 11.2 mm x 12 mm x 102 mm HA internal
ATORN solid carbide slotting cutter T=2 2.80 mm shaft DIN 6535 HB
ATORN solid carbide drill UNI TiAlNplus 8xD with IC 12.5 mm
Desk 4 feet Flex, 1800x800 mm, beech/silver
ATORN twist drill NV HSSE, DIN 338, 3.3 mm x 65 mm x 36 mm, 135°
WERA slotted screwdriver 9 x 150 mm, screw chisel series 900
ATORN high-perf. SC drill ULTRA M HPC 3xD 16.9 mm x 18 mm x 123 mm HA internal
BILZ HERMETIKUS K-GT 1 steel plug-in nipples G 1/2 inch female thread
ATORN screwdriver bit 7 mm 1/2 inch for hexagon socket screws
ATORN solid carbide drill UNI TiAlNplus 3xD with IC 13.0 mm straight shank HB