ATORN SC TVC end mill ULTRA M, D 16.0 x 50 x 56 x 108 mm teeth=5 HB shaft
Brand: ATORN
Surface: ULTRA M
Length: 108 mm
Art.-no. 16859108
Manufacturer article no. 11263751
EAN 4050293417739
Individual prices for customers after login
Application
The TVC end mills are optimally suited for processing with modern milling strategies. Cutting edge lengths of 3-5xD, reinforced cores and specially developed chip breaker geometries allow high working depths with maximum process reliability.
Execution
- solid carbide ultra-fine grain
- straight shank in line with DIN 6535 HB
- ULTRA M-coated
- centre cutting and edge protection chamfer
- 3xD design with clearance
- special chip breakers for short chips
- uneven twist angle
Brand | ATORN |
Main EAN Code | 4050293417739 |
Manufacturer Part Number | 11263751 |
Cutting material | SC |
Surface | ULTRA M |
Type | VA |
Number of cutting edges (Z) | 5 PCS |
Twist angle | 40° |
Tool holding device | HB parallel shank |
Construction length | Long |
Cutting edge diameter | 16 mm |
Cutting edge length | 50 mm |
Clearance length | 56 mm |
Length | 108 mm |
Edge protection chamfer length | 0.32 mm |
Clearance diameter | 15.7 mm |
Shank diameter | 16 mm |
fz stainless steel | 0.18 |
Gross Weight | 0.288 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 130-200 | 0.19 | ⚫ |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 150-230 | 0.19 | ⚫ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 80-170 | 0.19 | ⚪ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 50-80 | 0.19 | ⚪ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 50-80 | 0.19 | ⚪ |
Last viewed
ATORN solid carbide drill UNI TiAlNplus 3xD without IC 19.0 mm straight shank HA
ATORN solid carbide end mill 4 cutters 8.0 mm shaft DIN 6535HA MF
ATORN malleable iron screw clamp 200x100 mm, 2-component handle
ORION T-slot mill. cutter HSSE5 DIN 851 N size 12, 21.0 x 9 mm type N DIN 1835B
OLFA scraper with 45 mm wide blade handle made from PP
ORION inspection set with telescopic grip, lamp, magnet and mirrors
DAkkS calibration limited shaft slot gauge 100 - 200 mm
LISTA add-on tray (WxD) 380 x 310 mm
ORION bi-met. bandsaw bl. UNI combi t. 10° M42 67x1.6 mm 2/3, weld. service 1
AKASEL AKA-Moran-U 300mm polishing cloth, pol. 6–3µm and final pol 1µm