ATORN SC TVC end mill ULTRA M diameter 16.0x66x125mm teeth=4 HB shaft
Brand: ATORN
Surface: ULTRA M
Length: 125 mm
Art.-no. 16859128
Manufacturer article no. 11263757
EAN 4050293417791
Individual prices for customers after login
Application
The TVC end mills are optimally suited for processing with modern milling strategies. Cutting edge lengths of 3-5xD, reinforced cores and specially developed chip breaker geometries allow high working depths with maximum process reliability.
Execution
- solid carbide ultra-fine grain
- straight shank in line with DIN 6535 HB
- ULTRA M-coated
- centre cutting and edge protection chamfer
- special chip breakers for short chips
- uneven twist angle
Brand | ATORN |
Main EAN Code | 4050293417791 |
Manufacturer Part Number | 11263757 |
Cutting material | SC |
Surface | ULTRA M |
Type | VA |
Number of cutting edges (Z) | 4 PCS |
Twist angle | 40° |
Tool holding device | HB parallel shank |
Construction length | Extra long |
Cutting edge diameter | 16 mm |
Cutting edge length | 66 mm |
Length | 125 mm |
Edge protection chamfer length | 0.32 mm |
Shank diameter | 16 mm |
fz stainless steel | 0.18 |
Gross Weight | 0.315 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 130-200 | 0.19 | ⚫ |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 150-230 | 0.19 | ⚫ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 80-170 | 0.19 | ⚪ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 50-80 | 0.19 | ⚪ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 50-80 | 0.19 | ⚪ |
Last viewed
ATORN solid carbide drill UNI TiAlNplus 3xD with IC 10.0 mm straight shank HA
Test taper diameter 2 mm material gauge steel
ATORN SC compression milling cutter diameter 6.0 mm W-B:6.5 L:57x13 d6
Heavy-load pull-out shelf—back board frame h.xbay l.2500x900mm
Factory calibration for limited shaft slot gauge 50–100 mm
SUBITO spring for centring plate for 500.0-800 mm measuring range
ATORN twist drill TLP HSSE, DIN 338, type GS, 16.0 mm x 169 mm x 114 mm, 130°
HOFE tray rack basic bay 1,000x400 mm, 6 zp. trays, load cap. 200 kg
ATORN SC HPC POWER end mill, STEEL, 1.0 x 1.5 x 2 x 40 mm HA, type N, short
ATORN triangular file, 100 x 10 mm, coarse, silicon carbide