ATORN SC ball nose end mill T4, short 6x7x20x57 mm T=4 HA RockTec PRO
Brand: ATORN
Surface: RockTec PRO
Length: 57 mm
Art.-no. 16954365
Manufacturer article no. 11264829
EAN 4066107033804
Individual prices for customers after login
Application
Radius cutter in short design for machining materials up to 65 HRC, e.g. in die and mould making.
Execution
- Cutting material, Ultra Micro fine grain
- Cutting edge finish
- HA shaft in line with DIN 6535
- Clearance
- Type H
- With RockTec PRO coating
- Radius tolerance = +/- 0.005 mm
Advantage
- optimum chip removal and temperature resistance
- Optimised geometry for machining hard materials
- maximum service life thanks to RockTec PRO coating
Brand | ATORN |
Main EAN Code | 4066107033804 |
Manufacturer Part Number | 11264829 |
Cutting material | SC |
Surface | RockTec PRO |
Type | H |
Number of cutting edges (Z) | 4 PCS |
Twist angle | 30° |
Tool holding device | HA parallel shank |
Construction length | Short |
Cutting edge diameter | 6 mm |
Cutting edge length | 7 mm |
Clearance length | 20 mm |
Length | 57 mm |
Clearance diameter | 5.5 mm |
Shank diameter | 6 mm |
fz hard 65 HRC | 0.047 mm |
Gross Weight | 0.024 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | ft [mm/T] for diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 120-200 | 0.055 | ⚫ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 120-200 | 0.055 | ⚫ |
| 6.00 Hard materials | ||||||
| 6.01 Hardened steel -55 HRC | x40CrMoV5-1 | -55HRC | 0.9620 | 80-150 | 0.055 | ⚫ |
| 6.02 Hardened steel -65 HRC | 90MnCrV8 | <65HRC | 60-130 | 0.055 | ⚫ | |
Last viewed
ALFRA set, TriCut, 7 pieces with punch M 16/20/25/32/40/50/63 plastic case
ATORN cyl. wire brush 50 mm diameter, shank 6 mm crimped steel wire 0.20 mm
B+W INTERNATIONAL HDPE roller tool case
ORION collet chuck KSEE DK 30, 1-6.5 mm, 140 mm long
ORION hand tap VS HSS A 352 0° M5 0.8 mm ISO 2 TH/BH 3xD
ANKE workbench model 259 V, panel, zinc sheet coating, 1500x700x900 mm, RAL opt.
GEDORE spare complete hickory handle for 1,000 g ROTBAND-PLUS hammer
Feeler gauges 300 mm in ring 20 blades 0.10-2.00 mm T2
AMF hook wrench with pin, 12–14 mm, DIN 1810 B
ATORN SC miniature ball nose end mill diameter 0.3x0.3x3x55 mm T2 HA 4 ULTRA DC