ATORN SC ball nose end mill, extra-long 3x5x30x100 mm T=2 HA RockTec PRO
Brand: ATORN
Surface: RockTec PRO
Length: 100 mm
Art.-no. 16954508
Manufacturer article no. 11264576
EAN 4066107031275
Individual prices for customers after login
Application
Radius milling cutter, long design, for machining materials up to 65 HRC, e.g. in dip cutting and mould construction.
Execution
- Cutting material, Ultra Micro fine grain
- cutting edge finish
- HA shaft in line with DIN 6535
- Clearance
- type H
- With RockTec PRO coating
- Radius tolerance = +/- 0.005 mm
Advantage
- optimum chip removal and temperature resistance
- Optimised geometry for machining hard materials
- maximum service life thanks to RockTec PRO coating
Brand | ATORN |
Main EAN Code | 4066107031275 |
Manufacturer Part Number | 11264576 |
Cutting material | SC |
Surface | RockTec PRO |
Type | H |
Number of cutting edges (Z) | 2 PCS |
Twist angle | 30° |
Tool holding device | HA parallel shank |
Construction length | Extra long |
Cutting edge diameter | 3 mm |
Cutting edge length | 5 mm |
Clearance length | 30 mm |
Length | 100 mm |
Clearance diameter | 2.8 mm |
Shank diameter | 6 mm |
fz hard 65 HRC | 0.024 mm |
Gross Weight | 0.017 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | ft [mm/T] for diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 120-200 | 0.028 | ⚫ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 120-200 | 0.028 | ⚫ |
| 6.00 Hard materials | ||||||
| 6.01 Hardened steel -55 HRC | x40CrMoV5-1 | -55HRC | 0.9620 | 80-150 | 0.028 | ⚫ |
| 6.02 Hardened steel -65 HRC | 90MnCrV8 | <65HRC | 60-130 | 0.028 | ⚫ | |
Last viewed
KNIPEX stripping pliers, 180 mm, self-adjusting
ORION robust impact-resistant polycarbonate glove holder, anthracite-coloured
ATORN solid carbide slotting cutter, 3 cutters, 6.5 mm, extra short, 45°, MF
ATORN test pin RSB TC1 7.38 mm x 70 mm
LEITECH thread insert UNC 12-24 no go
PFERD 2001 mounted point set, hardness O, shank diameter 6 mm, coarse grain
EWO cylinder pressure reducing valve for oxygen, single-stage
EDSYN F-SW 26 lead-free solder wire 1.0 mm 250 g Sn99 Cu1
WERA bit holder 1/4 inch x 75 mm with snap ring and magnet
LEITECH DMG adapter M8-6H