ATORN SC drill bit type NE ULTRA N PRO 5xD with internal cooling dia. 12.5 mm
Brand: ATORN
Surface: ULTRA N PRO
Length: 124 mm
Art.-no. 11199125
Manufacturer article no. 11869573
EAN 4066107041847
Individual prices for customers after login
Application
For HPC drilling in non-ferrous metals
Execution
- SC ULTRA N PRO high-performance drill bit
- 2 margins
- 4-facet point
- 30° spiral angle
- Straight main cutting edge
- Polished chip grooves
- Specially prepared cutting edges
Advantage
- Perfect chip breaking due to the sharp, specially prepared cutting edges
- The specially designed ULTRA N PRO coating prevents built-up edges
- Very good chip removal even in the case of long-chipping material due to the large and polished chip grooves
- Excellent drilled hole quality due to low friction coefficient
Brand | ATORN |
Cutting edge diameter | 12.5 mm |
Main EAN Code | 4066107041847 |
Manufacturer Part Number | 11869573 |
Tolerance of cutting edge diameter | m7 |
Cutting material | SC |
Surface | ULTRA N PRO |
Max. drilling depth (D) | 5xD |
Type | HPC ALU |
Coolant supply | Internal |
Tool holding device | HA parallel shank |
Angle of the tip | 130 Degree |
Shank diameter | 14 mm |
Chip flute length | 77 mm |
Length | 124 mm |
f aluminium | 0.5 mm/r |
Gross Weight | 0.178 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | f [mm/U] for diameter | Suitability |
|---|---|---|---|---|---|---|
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 350-370 | 0.50-0.54 | ⚫ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 380-400 | 0.52-0.56 | ⚫ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 190-210 | 0.45-0.50 | ⚫ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 210-230 | 0.47-0.51 | ⚫ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 210-230 | 0.45-0.50 | ⚫ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 100-120 | 0.43-0.47 | ⚫ | |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 260-280 | 0.47-0.51 | ⚫ |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 70-80 | 0.43-0.47 | ⚫ | |
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | - | - | ||
| 3.10 Graphite | C8000 | <60 | - | - | ||
| 3.11 Composite materials | - | - | ||||
Last viewed
FAHRION draw-in collet chuck DIN 6341 K32 2.00 round 386E 0
WIDIA Top Cut 4 high-perf. drill bit w. index. ins. 5xD 27x32x228 mm D w. IC
ATORN HPC reamer, SC TiALN, T=6 B, 7-8° 6.5mm H7 x 100mm x 16mm HA (steel)
ORION high-perf. drill, SC TiAlN, HPC 3xD 8.4 mm x 10 mm x 89 mm HB internal
ATORN twist drill TLP HSSE, DIN 1897, 9.2 mm x 84 mm x 40 mm, 130°
RIDGID replacement cutting wheel for stainless steel pipe cutters, pack of 2
LEITECH thread test arbour, M 10 - 6H, with vernier scale 0.1 mm
ORION SC end mill teeth=4 diameter 12.0x28x83mm 45 degrees HA shaft TiAlN
ORION SC end mill, diameter 16.0 x 16 x 36 x 92 mm, HB shaft
ATORN combination wrench 11 mm DIN 3113 A