ATORN SC end mill D 10.0 x 22 x 32 x 70mm, HB shaft 4 cutting edges, ULTRA MS
Brand: ATORN
Surface: ULTRA MS
Length: 70 mm
Art.-no. 16670200
Manufacturer article no. 11861024
EAN 4050293359480
Individual prices for customers after login
Application
End mill for machining stainless steel, titanium alloy, nickel and copper alloys.
Execution
- ultra-fine grain cemented carbide
- HB straight shank
- with clearance
- high-performance ULTRA MS layer
- defined cutting edge rounding
- centre cutting
Advantage
- optimised, positive cutting geometry
- optimum chip removal and temperature resistance
- maximum service life thanks to ULTRA MS coating
Brand | ATORN |
Main EAN Code | 4050293359480 |
Manufacturer Part Number | 11861024 |
Cutting material | SC |
Surface | ULTRA MS |
Type | VA |
Number of cutting edges (Z) | 4 PCS |
Twist angle | 40° |
Tool holding device | HB parallel shank |
Construction length | Normal |
Cutting edge diameter | 10 mm |
Cutting edge length | 22 mm |
Clearance length | 32 mm |
Length | 70 mm |
Clearance diameter | 9.2 mm |
Shank diameter | 10 mm |
fz stainless steel | 0.044 mm |
Harmonized System Code | 82077031 |
Product Group | 1HJ |
Gross Weight | 0.075 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 120-140 | 0.025 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 130-150 | 0.025 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 130-150 | 0.025 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 120-140 | 0.03 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 120-140 | 0.03 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | - | - | ⚫ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | - | - | ⚫ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | - | - | |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | - | - | |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | - | - | |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 60-80 | 0.02 | ⚫ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 60-80 | 0.025 | ⚫ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 60-80 | 0.022 | ⚫ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 60-80 | 0.025 | ⚫ |
HAHN+KOLB Catalogue (1)
Last viewed
fork extensions, open design, length 2000 mm, WxH 128x48 mm, RAL 7021
draw-in collet chuck 386E (K32) DIN 6341 round 18.5 mm smooth
ANKE workb., mod. 106 V, panel solid beech 2800 x 700 x 900 mm RAL 7035/5010
ORION ceramic gauge block tolerance class 1 1.09 mm
ATORN cylinder wire brush 70 mm diameter, shank 6 mm crimped brass wire 0.30 mm
ATORN twist drill TLP HSSE, DIN 338, 9.2 mm x 125 mm x 81 mm, 130°
HK tool cabinet system 700 S, model 32/7 with SCA
TESA TESA TLC connection cable with DIGIMATIC interface, cable length 2 m
ATORN HPC reamer, solid carbide TIALN through hole diameter 19.00 mm H7
HS reference sheet brass 0.01 mm format 150 x 500 mm, 5x in sliding carton