ATORN SC end mill D 10.0 x 22 x 32 x 72mm, HA shaft 5 cutting edges, ULTRA MS
Brand: ATORN
Surface: ULTRA MS
Length: 72 mm
Art.-no. 16670354
Manufacturer article no. 11861417
EAN 4050293363418
Individual prices for customers after login
Application
HPC end mill with uneven helical and uneven pitch for rough machining and finish machining of stainless steel, titanium alloy, nickel and copper alloys. The uneven helical pitch means that vibrations on the tool are reduced, which results in outstanding finished surfaces, while, at the same time, feed rates and cutting depths can be increased.
Execution
- ultra-fine grain cemented carbide
- with uneven helical (35/38°)
- with reinforced core
- HA straight shank
- with clearance
- high-performance ULTRA MS layer
- with edge protection chamfer
- defined cutting edge rounding
- centre cutting
Advantage
- optimum suitability for trochoidal milling
- HPC geometry for maximum feed rates and running smoothness
- suitable for large cutting depths
Brand | ATORN |
Main EAN Code | 4050293363418 |
Manufacturer Part Number | 11861417 |
Cutting material | SC |
Surface | ULTRA MS |
Type | VA |
Number of cutting edges (Z) | 5 PCS |
Twist angle | 35° |
Tool holding device | HA parallel shank |
Construction length | Normal |
Cutting edge diameter | 10 mm |
Cutting edge length | 22 mm |
Clearance length | 32 mm |
Length | 72 mm |
Edge protection chamfer length | 0.2 mm |
Clearance diameter | 9.2 mm |
Shank diameter | 10 mm |
fz stainless steel | 0.044 mm |
Gross Weight | 0.090 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 120-140 | 0.055 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 130-150 | 0.055 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 130-150 | 0.055 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 120-140 | 0.055 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 120-140 | 0.055 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | - | ⚫ | |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | - | ⚫ | |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | - | ||
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | - | ||
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | - | ||
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 60-80 | 0.048 | ⚫ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 60-80 | 0.06 | ⚫ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 60-80 | 0.048 | ⚫ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 60-80 | 0.06 | ⚫ |
Last viewed
KÜBLER Reflectiq high-vis polo shirt fluorescent orange/anthracite size L
ATORN TX 20 x 50 bit 1/4 inch, grey ring
HAZET combination wrench 17 mm DIN 3113 A
WIHA 1/4 inch hexagon bit C 6.3 AF 8 mm 25 mm version Z
ORION organising magnet, 20 mm diameter, white
ANKE workb., model 205 V, panel with zinc sheet coating 2800 x 700 x 850 mm
Cabinet trolley 250 litres LxWxH 1115x820x990 mm
ER16 tap collet diameter 4.5 mm x 3.4 mm
RÖHM collet chuck CAPTIS GTG 52 D43.0
EROGLU milling cutter holder SK50-25-160 AD