ATORN SC end mill D 16.0 x 32 x 46 x 92mm, HB shaft 5 cutting edges, ULTRA MS
Brand: ATORN
Surface: ULTRA MS
Length: 92 mm
Art.-no. 16670346
Manufacturer article no. 11861411
EAN 4050293363357
Individual prices for customers after login
Application
HPC end mill with uneven helical and uneven pitch for rough machining and finish machining of stainless steel, titanium alloy, nickel and copper alloys. The uneven helical pitch means that vibrations on the tool are reduced, which results in outstanding finished surfaces, while, at the same time, feed rates and cutting depths can be increased.
Execution
- ultra-fine grain cemented carbide
- with uneven helical (35/38°)
- with reinforced core
- HB straight shank
- with clearance
- high-performance ULTRA MS layer
- with edge protection chamfer
- defined cutting edge rounding
- centre cutting
Advantage
- optimum suitability for trochoidal milling
- HPC geometry for maximum feed rates and running smoothness
- suitable for large cutting depths
Brand | ATORN |
Main EAN Code | 4050293363357 |
Manufacturer Part Number | 11861411 |
Cutting material | SC |
Surface | ULTRA MS |
Type | VA |
Number of cutting edges (Z) | 5 PCS |
Twist angle | 35° |
Tool holding device | HB parallel shank |
Construction length | Normal |
Cutting edge diameter | 16 mm |
Cutting edge length | 32 mm |
Clearance length | 46 mm |
Length | 92 mm |
Edge protection chamfer length | 0.3 mm |
Clearance diameter | 15 mm |
Shank diameter | 16 mm |
fz stainless steel | 0.065 mm |
Gross Weight | 0.250 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 120-140 | 0.08 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 130-150 | 0.08 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 130-150 | 0.08 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 120-140 | 0.08 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 120-140 | 0.08 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | - | ⚫ | |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | - | ⚫ | |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | - | ||
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | - | ||
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | - | ||
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 60-80 | 0.07 | ⚫ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 60-80 | 0.095 | ⚫ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 60-80 | 0.07 | ⚫ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 60-80 | 0.095 | ⚫ |
Last viewed
Cantilever basic sh. IPE120 single-sid. 2000x1300x500 RAL5010 w.4 cantil./rack
EWS reducing sleeve with groove D 20 x 8 mm
LEITECH thread test arbour, M 4 x 0.5 - 6H, with digital readout 0.01 mm
LEITECH arbour UNC 3/4-10 with scale 0.5 mm
ATORN twist drill TLP HSSE, DIN 340, 1.9 mm x 80 mm x 53 mm, 130°
ATORN solid carbide end mill T4 long HA, 4.0 x 16 x 22 x 62 mm, coated
LISTA Side wall L1006 Standard (WxDxH) 30x400x1100mm zinc-plated
ATORN ER16 standard precision clamping nut for sealed collets
ANKE workbench model 131 V 4050x700x900 mm panel zinc sheet coat., RAL 7035/5010
ORION solid carbide slotting square end mill, 3-cutter, 3.0 mm shank, DIN 1835A