ATORN SC end mill D 20.0 x 38 x 58 x 104mm, HA shaft 5 cutting edges, ULTRA MS
Brand: ATORN
Surface: ULTRA MS
Length: 104 mm
Art.-no. 16670357
Manufacturer article no. 11861420
EAN 4050293363449
Individual prices for customers after login
Application
HPC end mill with uneven helical and uneven pitch for rough machining and finish machining of stainless steel, titanium alloy, nickel and copper alloys. The uneven helical pitch means that vibrations on the tool are reduced, which results in outstanding finished surfaces, while, at the same time, feed rates and cutting depths can be increased.
Execution
- ultra-fine grain cemented carbide
- with uneven helical (35/38°)
- with reinforced core
- HA straight shank
- with clearance
- high-performance ULTRA MS layer
- with edge protection chamfer
- defined cutting edge rounding
- centre cutting
Advantage
- optimum suitability for trochoidal milling
- HPC geometry for maximum feed rates and running smoothness
- suitable for large cutting depths
Brand | ATORN |
Main EAN Code | 4050293363449 |
Manufacturer Part Number | 11861420 |
Cutting material | SC |
Surface | ULTRA MS |
Type | VA |
Number of cutting edges (Z) | 5 PCS |
Twist angle | 35° |
Tool holding device | HA parallel shank |
Construction length | Normal |
Cutting edge diameter | 20 mm |
Cutting edge length | 38 mm |
Clearance length | 58 mm |
Length | 104 mm |
Edge protection chamfer length | 0.4 mm |
Clearance diameter | 19 mm |
Shank diameter | 20 mm |
fz stainless steel | 0.08 mm |
Gross Weight | 0.540 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 120-140 | 0.1 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 130-150 | 0.1 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 130-150 | 0.1 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 120-140 | 0.1 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 120-140 | 0.1 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | - | ⚫ | |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | - | ⚫ | |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | - | ||
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | - | ||
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | - | ||
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 60-80 | 0.09 | ⚫ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 60-80 | 0.12 | ⚫ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 60-80 | 0.09 | ⚫ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 60-80 | 0.12 | ⚫ |
Last viewed
ATORN solid carbide drill UNI TiAlNplus 3xD without IC 4.6 mm straight shank HB
ATORN solid carbide drill UNI TiAlNplus 3xD with IC 6.7 mm straight shank HB
ATORN transverse drive shell end mill arbour SK50 (ISO 7388-1) dia. 27mm A=130mm
ATORN SC end mill D 6.0 x 16 x 20 x 50mm, HB shaft 4 cutting edges, ULTRA MS
ANKE workbench model 205 V 4050 x 700 x 850 mm, solid beech panel, RAL 7035/5010
ATORN mini cutting insert AQR 4.0mm R0.2 L22 HC5615
LEITECH thread test arbour, M 14 - 6H, with digital readout 0.01 mm
MITUTOYO digital micrometer head, 0–25 mm meas. range, spherical, SR4, with nut
ORION square key 6 mm made of special steel DIN 904
ATORN twist drill TLP HSSE, DIN 1897, 9.2 mm x 84 mm x 40 mm, 130°