ATORN SC mini radius cutter TiAlSiN 2.5x2x50 mm clearance 2.41x6 mm
Brand: ATORN
Surface: RockTec PRO
Length: 50 mm
Art.-no. 16954082
Manufacturer article no. 11264405
EAN 4050293656343
Individual prices for customers after login
Application
Mini radius cutter with long neck for machining materials up to 65 HRC.
Execution
- Cutting material, Ultra Micro fine grain
- cutting edge finish
- HA shaft in line with DIN 6535
- Clearance
- type H
- With RockTec PRO coating
- Radius tolerance = 0/-0.005 mm
Advantage
- optimum chip removal and temperature resistance
- Optimised geometry for machining hard materials
- maximum service life thanks to RockTec PRO coating
Brand | ATORN |
Main EAN Code | 4050293656343 |
Manufacturer Part Number | 11264405 |
Cutting material | SC |
Surface | RockTec PRO |
Type | H |
Number of cutting edges (Z) | 2 PCS |
Twist angle | 20° |
Tool holding device | HA parallel shank |
Construction length | Normal |
Cutting edge diameter | 2.5 mm |
Cutting edge length | 2 mm |
Clearance length | 6 mm |
Length | 50 mm |
Clearance diameter | 2.41 mm |
Shank diameter | 4 mm |
fz hard 65 HRC | 0.021 mm |
Gross Weight | 0.022 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | ft [mm/T] for diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 120-200 | 0.025 | ⚪ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 120-200 | 0.025 | ⚪ |
| 6.00 Hard materials | ||||||
| 6.01 Hardened steel -55 HRC | x40CrMoV5-1 | -55HRC | 0.9620 | 80-150 | 0.025 | ⚫ |
| 6.02 Hardened steel -65 HRC | 90MnCrV8 | <65HRC | 60-130 | 0.025 | ⚫ | |
Last viewed
ATORN solid carbide slotting cutter ultra T=2 0.80 mm shaft DIN 6535 HA ultra
ATORN twist drill HSSE-V3 TiAlN 5XD 3.3 x 4 mm x 65 mm
ATORN indexable milling insert ADHX 120408-ER HC4410
ORION square key 16 mm made of special steel DIN 904
ATORN solid carbide end mill T2 HB, 10.0 x 22 x 29 x 72 mm, coated
ORION sol. car. square end mill, 3-edge, type W 12.0 mm shk. DIN 1835A 45 deg.
ZEUS roller pin for knurl pressing tool with flat face, 6.0 mm x 20mm
DAkkS calibration limited shaft slot gauge 1 - 10 mm
ATORN surface chuck (Weldon) BT40 (ISO 7388-2) dia. 6 mm A=200 mm
ATORN SC HSC end mill - G/CFRP diameter 8.0 mm W10 degrees L:63x20 t:6 d8