ATORN SC radius cutter long TiAlSiN 3x3.5x80 mm radius 1.5 mm
Brand: ATORN
Surface: RockTec PRO
Length: 80 mm
Art.-no. 16954308
Manufacturer article no. 11264098
EAN 4050293653274
Individual prices for customers after login
Application
Radius milling cutter, long design, for machining materials up to 65 HRC, e.g. in dip cutting and mould construction.
Execution
- Cutting material, Ultra Micro fine grain
- cutting edge finish
- HA shaft in line with DIN 6535
- Clearance
- type H
- With RockTec PRO coating
- Radius tolerance = +/- 0.005 mm
Advantage
- optimum chip removal and temperature resistance
- Optimised geometry for machining hard materials
- maximum service life thanks to RockTec PRO coating
Brand | ATORN |
Main EAN Code | 4050293653274 |
Manufacturer Part Number | 11264098 |
Cutting material | SC |
Surface | RockTec PRO |
Type | H |
Number of cutting edges (Z) | 2 PCS |
Twist angle | 30° |
Tool holding device | HA parallel shank |
Construction length | Extra long |
Cutting edge diameter | 3 mm |
Cutting edge length | 3.5 mm |
Length | 80 mm |
Shank diameter | 6 mm |
fz hard 65 HRC | 0.024 mm |
Gross Weight | 0.022 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | ft [mm/T] for diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 120-200 | 0.028 | ⚪ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 120-200 | 0.028 | ⚪ |
| 6.00 Hard materials | ||||||
| 6.01 Hardened steel -55 HRC | x40CrMoV5-1 | -55HRC | 0.9620 | 80-150 | 0.028 | ⚫ |
| 6.02 Hardened steel -65 HRC | 90MnCrV8 | <65HRC | 60-130 | 0.028 | ⚫ | |
Last viewed
ATORN cutting insert for cutting off, T3, right, 1.5mm x 6.4mm 20mm, left
KÄRCHER accessory set liquid DN40
KLAUKE K 28 crimping tool for wire end ferrules 10-50 mm²
ATORN high-perf. pilot drill, SC TiAlN, 5xD 2.02 mm x 4 mm x 57 mm HA internal
HAZET long 3/8 inch socket 20 mm DIN 3124 with bi-hexagon
ATORN boring bar, pos., w. IC A20R SDXCR 11
PRESSOL oil spray can made of die-cast zinc, 300 ml, grey, metallic
ANKE workbench model 410 V 1500x700x900 mm panel zinc sheet coat., RAL 7035/7016
ORION slotting cutter HSSE8 DIN 327D short 5.75 mm shank DIN 1835B
ATORN machine vice MH-S B125 mm bed length 662 mm