ATORN SC single-tooth milling cutter HA, 16.0 x 38 x 45 x 93 mm, plain
Brand: ATORN
Surface: Uncoated
Length: 93 mm
Art.-no. 16652114
Manufacturer article no. 11263109
EAN 4050293340334
Individual prices for customers after login
Application
For milling, plunging and contour milling NF metals and plastics.
Execution
- Solid carbide ultra-fine grain
- Straight shank in accordance with DIN 6535 HA
- Uncoated
- Clearance
- right-hand cutting
- Mirror finish
Advantage
- Defined edge rounding for maximum service life
- Large chip area for optimum chip flow
- Ideal for NF metals and plastics
Brand | ATORN |
Main EAN Code | 4050293340334 |
Manufacturer Part Number | 11263109 |
Cutting material | SC |
Surface | Uncoated |
Type | W |
Number of cutting edges (Z) | 1 PCS |
Twist angle | 30° |
Tool holding device | HA parallel shank |
Construction length | Normal |
Cutting edge diameter | 16 mm |
Cutting edge length | 38 mm |
Clearance length | 45 mm |
Length | 93 mm |
Clearance diameter | 15.7 mm |
Shank diameter | 16 mm |
fz aluminium | 0.12 mm |
Product Group | 1HJ |
Gross Weight | 0.200 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 350-500 | 0.11 | ⚫ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 150-250 | 0.11 | ⚫ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 200-350 | 0.11 | ⚫ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 150-250 | 0.11 | ⚫ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 200-350 | 0.11 | ⚫ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 350-500 | 0.11 | ⚫ | |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 150-250 | 0.11 | ⚫ |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 250-400 | 0.11 | ⚫ | |
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | 200-350 | 0.11 | ||
| 3.10 Graphite | C8000 | <60 | - | |||
| 3.11 Composite materials | - | |||||
Last viewed
GEDORE torque wrench with T-handle, 8.0 Nm, DREMOMETER TFS
META heavy-load cantilever shelf, 3 fields, IPE180 double-sided, 3000 x 800 mm
MAHR electronic length measuring probe P 1300 MB, compressed air, 4 mm
GEDORE combination spanner UD profile 16 mm
BOSCH Expert C470 sandpaper, 11 holes, 180 grit
ORION high-perf. drill bit SC TiNAlOX HPC 3xD 11.8 x 12 x 102 mm HB shank w. IC
WIHA easyTorque torque screwdriver, fixed setting to 4.5 Nm
ATORN sheet metal partitions (5 pieces) 60 x 347 mm for drawer height 80 mm
ATORN ER20 HP collet dia. 13.0 mm sealed, concentricity 5 µm
ANKE workbench, model 419 V, panel solid beech. 2000x700x850 mm, RAL 7035/7016