ATORN SC torus milling cutter D 4.0 x 4 x 25 x 75mm r=0.4 T2 HA ULTRA DC-coated
Brand: ATORN
Surface: ULTRA DC
Length: 75 mm
Art.-no. 16661196
Manufacturer article no. 12040138
EAN 4050293403428
Individual prices for customers after login
Application
Torus milling cutter for process reliability in machining graphite, GRP and CRP.
Execution
- High-tech CVD diamond coating
- Coating thickness 10+2 µm
- With clearance
- Concentricity 0.005 mm
Advantage
- Wear-resistant, crystalline diamond coating
- Optimised, highly accurate geometry
Brand | ATORN |
EAN | 4050293403428 |
Manufacturer Part Number | 12040138 |
Cutting material | SC |
Surface | ULTRA DC |
Type | N |
Number of cutting edges (Z) | 2 PCS |
Twist angle | 30° |
Tool holding device | HA parallel shank |
Construction length | Long |
Cutting edge diameter | 4 mm |
Cutting edge length | 4 mm |
Clearance length | 25 mm |
Length | 75 mm |
Clearance diameter | 3.9 mm |
Shank diameter | 6 mm |
Edge radius | 0.4 mm |
fz graphite | 0.03 mm |
Harmonized System Code | 82077031 |
Product Group | 1FC |
Gross Weight | 0.020 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | - | - | ⚫ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | - | - | ⚫ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | - | - | ⚫ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | - | - | ⚫ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | - | - | ⚫ |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | - | - | ⚫ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | - | - | ||
| 3.08 Duroplast | Bakelit, Melamin | <150 | - | - | ||
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | - | - | ⚫ | |
| 3.10 Graphite | C8000 | <60 | 280-320 | 0.04 | ⚫ | |
| 3.11 Composite materials | - | - | ⚫ | |||
Last viewed
ATORN wedge clamping device, smooth, 30x22 mm, M12, including slot nut
ATORN collet ER16 UP dia. 9.0 mm metallic-sealed concentricity 2 µm
ATORN SC torus mill. cutter, long diameter 16.0 x 22 x 85 x 125 mm r1.0 T=4 RT65
Wing door cabinet, HxWxD 1950x1000x600 mm, with divider, RAL 7035/5010
EICHINGER scoops with tine duct, 4,000 kg, 1,750 l, hot-dip galvanised
RÖHM DURO-M 4-jaw lathe chuck 315 ST 8 ISO 702-3 55027 stud bolt/collar nut
DAkkS calibration, individual test pin, 30.001-40 mm, option 2
DAkkS calibration thread limit plug gauge 3 - 50 mm
Mitutoyo ID-C low meas. force inch/metric 0.5/0.0005 inch, back panel w. eyelet
FEIN drill chuck SKE