ATORN SK40 surface chuck (Weldon) dia. 20 mm A 63 mm
Brand: ATORN
Art.-no. 23158167
Manufacturer article no. 22661306
EAN 4050293714531
Individual prices for customers after login
Application
For clamping tools with straight shank and clamping surface in accordance with DIN 1835 B.
Execution
- Case-hardened
- With plastic edge-protection ring
- Prevents the tool from slipping while maintaining high concentricity
- Taper shank tolerances in accordance with DIN 2080
- With annular groove
Notes
The previous standard DIN 69871-1 was superseded by ISO 7388-1.
Delivery
1x SK40 surface chuck (Weldon) (ISO 7388-1)
 | |
Brand | ATORN |
Tool holding device | SK 40 |
Clamping diameter (d) | 20 mm |
Projecting length (A) | 63 mm |
Outer diameter (D) | 52 mm |
Balancing quality | G 2.5 at 25,000 rpm |
Last viewed
ATORN SC mini radius cutter, diameter 0.4 x 0.4 x 2.0 x 50 mm, HA shaft
Factory calibration for micrometer 300–500 mm
eepos module M/L Harting 6B suitable for M2+ and L2+ 500V/16A feed
ATORN cutting insert for cutting off, T3, right, 3.0mm x 6.4mm 20mm, left
KIENINGER cemented carbide indexable inserts WPB-FB 16 LC610Z R=7
Large toe plate 476x340 mm
ATORN twist drill U4 HSSE, DIN 1897, 7.8 mm x 79 mm x 37 mm, 118°
ATORN ImageController1, 600 mm
ATORN SC mini end mill, long, 0.2 x 0.3 x 1 x 50 mm T2 RT65
ATORN thread mould with IC HSSE-PM Carbo DIN 376 M16 x 2.0 mm ISO 2 3xD