ATORN chuck for solid drill bits BT40 (ISO 7388-2) dia. 32 mm A=80 mm
Brand: ATORN
Art.-no. 23163118
Manufacturer article no. 22661022
EAN 4050293714371
Individual prices for customers after login
Application
This chuck is used to clamp indexable insert solid drill bits that are fixed with two screws, similar to a surface chuck.
Execution
- Alloyed case-hardening steel, core tensile strength at least 950 N/mm²
- Case-hardened HRc 60 ± 2 (HV 700 ± 50), hardness depth 0.8 mm ± 0.2 mm, black oxide finish
- Taper angle tolerance quality < AT3 in accordance with DIN 7187 and DIN 2080
- Max. concentricity < 0.005 mm
Notes
The previous standard JIS B 6339 MAS BT was superseded by ISO 7388-2.
Delivery
1x BT40 solid drill chuck (ISO 7388-2)
 | |
Brand | ATORN |
Tool holding device | BT 40 |
Form | JD |
Clamping diameter (d1) | 32 mm |
Outer diameter (D) | 52 mm |
Projecting length (A) | 80 mm |
Coolant supply | Internal axial |
Clearance length to collar (L2) | 54 mm |
Clamp in depth (T) | 64 mm |
Balancing quality | G 2.5 at 25,000 rpm |
Last viewed
ANKE workbench model 283 V panel zinc sheet ctg., 2000x700x850 mm, RAL 7035/5010
PFERD felt polishing point, conical 25x30 mm, shaft diameter 6 mm
indexable insert spare parts, clamping screw M 3.5 x 7.5 mm
AUTOSTAT spring balance type 7221 0800/3 carrying capacity 7.0–10.0 kg 3000 mm
GEDORE combination wrench 7 mm DIN 3113 B
ATORN twist drill N HSS, steam-treated, DIN 1897, 1.7 mm x 34 mm x 10 mm, 118°
ORION SC end mill, short, T=4 5.0 x 9mm, TiAlN, type H, shaft DIN 6535HA
ORION high-perf. drill, SC TiAlN, HPC 3xD 7.7 mm x 8 mm x 79 mm HB external
MAHR 1086 R MarCator digital dial gauge 25 mm/1 inch, 0.01
ATORN metal circ saw blade, SC, finely toothed, 20 mm x 0.7 mm x 5 mm A T=48