ATORN chuck for solid drill bits HSK100 (ISO 12164) dia. 20 mm A=90 mm
Brand: ATORN
Art.-no. 23163104
Manufacturer article no. 22661008
EAN 4050293714234
Individual prices for customers after login
Application
This chuck is used to clamp indexable insert solid drill bits that are fixed with two screws, similar to a surface chuck.
Execution
- Alloyed case-hardening steel, core tensile strength at least 950 N/mm²
- Case-hardened HRc 60 ± 2 (HV 700 ± 50), hardness depth 0.8 mm ± 0.2 mm, black oxide finish
- Taper angle tolerance quality < AT3 in accordance with DIN 7187 and DIN 2080
- Max. concentricity < 0.005 mm
Notes
The previous standard DIN 69871 was superseded by ISO 12164.
Delivery
1x HSK63 or HSK100 solid drill chuck (ISO 12164)
 | |
Brand | ATORN |
Tool holding device | HSK 100 |
Form | A |
Clamping diameter (d) | 20 mm |
Outer diameter (D) | 40 mm |
Projecting length (A) | 90 mm |
Clearance length to collar (L2) | 61 mm |
Clamp in depth (L3) | 46 mm |
Coolant supply | Internal axial |
Balancing quality | G 2.5 at 25,000 rpm |
Last viewed
FAHRION sealing washers for internal cooling HP25-DI 2.00 mm 430 E
Locker cabinet w. base, compart. 300 mm, 1850x1230x500 mm, RAL 7035, 16 shelves
testo 835-T1 infrared thermometer, measuring range -30 to +600 degrees
SCHMALZ VacuMaster VM 125/6 lifting device, 6 suction plates and spiral cable
EDDING 550 permanent marker, blue, round nib 3-4 mm, waterproof
Drawer, 60 mm/40 mm, part. ext., 70 kg, colour choice, for int.: 900x600mm
PLANETA gear chain trolley, load capacity 2,000 kg, flange width 88-203 mm
LEITECH thread test arbour M 2 x 0.25 - 6H with scale 0.5 mm
BOSCH combi laser GCL 2-15, working range 10–15 m, laser class 2, IP 54
ORION machine tap extension TE 8 x 100 x 80 x 130 mm