ATORN chuck for solid drill bits HSK100 (ISO 12164) dia. 25 mm A=95 mm
Brand: ATORN
Art.-no. 23163105
Manufacturer article no. 22661009
EAN 4050293714241
Individual prices for customers after login
Application
This chuck is used to clamp indexable insert solid drill bits that are fixed with two screws, similar to a surface chuck.
Execution
- Alloyed case-hardening steel, core tensile strength at least 950 N/mm²
- Case-hardened HRc 60 ± 2 (HV 700 ± 50), hardness depth 0.8 mm ± 0.2 mm, black oxide finish
- Taper angle tolerance quality < AT3 in accordance with DIN 7187 and DIN 2080
- Max. concentricity < 0.005 mm
Notes
The previous standard DIN 69871 was superseded by ISO 12164.
Delivery
1x HSK63 or HSK100 solid drill chuck (ISO 12164)
 | |
Brand | ATORN |
Main EAN Code | 4050293714241 |
Manufacturer Part Number | 22661009 |
Tool holding device | HSK 100 |
Form | A |
Clamping diameter (d) | 25 mm |
Outer diameter (D) | 45 mm |
Projecting length (A) | 95 mm |
Clearance length to collar (L2) | 66 mm |
Clamp in depth (L3) | 51 mm |
Coolant supply | Internal axial |
Balancing quality | G 2.5 at 25,000 rpm |
Gross Weight | 2.720 kg |
Last viewed
ATORN WK HPC/HSC torus mill cttr D=12.0x9x17mm r=0.5 HPC/HSC T4 WK sz 30 sz=10x4
ORION, indexable insert drill for clamping screw no. 11213-11217 M1.6 x 13.5
ATORN reversible top jaw steel hardened for JN07T
ORION end mill, extra short TICN+ 35.0 mm HSSE8-TiCN+TiN N S1835B type N, T=6
ATORN indexable insert VCMT 160408-MP1 HC7615
MITUTOYO dial calipers 0–150 mm 002 mm 2 mm/rev metric
ATORN twist drill bit type UNI/VA HSSE-V3 TiAlN 3xD 18.0 x 20 mm x 62 mm
Rubber flex collet chuck J 443, clamping range 2.8 - 7.0 mm
GEDORE torque wrench with T-handle, 8.0 Nm, DREMOMETER TFS