ATORN chuck for solid drill bits HSK63 (ISO 12164) dia. 40 mm A=105 mm
Brand: ATORN
Art.-no. 23163103
Manufacturer article no. 22661007
EAN 4050293714227
Individual prices for customers after login
Application
This chuck is used to clamp indexable insert solid drill bits that are fixed with two screws, similar to a surface chuck.
Execution
- Alloyed case-hardening steel, core tensile strength at least 950 N/mm²
- Case-hardened HRc 60 ± 2 (HV 700 ± 50), hardness depth 0.8 mm ± 0.2 mm, black oxide finish
- Taper angle tolerance quality < AT3 in accordance with DIN 7187 and DIN 2080
- Max. concentricity < 0.005 mm
Notes
The previous standard DIN 69871 was superseded by ISO 12164.
Delivery
1x HSK63 or HSK100 solid drill chuck (ISO 12164)
 | |
Brand | ATORN |
Tool holding device | HSK 63 |
Form | A |
Clamping diameter (d) | 40 mm |
Outer diameter (D) | 60 mm |
Projecting length (A) | 105 mm |
Clearance length to collar (L2) | 76 mm |
Clamp in depth (L3) | 67 mm |
Coolant supply | Internal axial |
Balancing quality | G 2.5 at 25,000 rpm |
Last viewed
DAkkS calibr. certif., Subito, set of two devices
atlas Flash 6105 XP low-cut safety shoes, S3, size 42
ATORN Holder SVLCL 0808 D07
BOSCH Starter Set 2 x batteries GBA 12 V/3.0 Ah and charger GAL 12V-40
BERNSTEIN ESD tweezers, sickel-shaped tips 120 mm
ORION solid carbide finishing cutter diameter 20x42x90x144 mm T=6 HA
AUTOSTAT 77003137 chain ends original spare part
ATORN hexagon socket 13 mm 3/8 inch DIN 3124
AKASEL AKA-PIATTO 350 mm diamond sanding disc, grain size 80
Pica BIG Ink Smart-Use Marker XL red SB