ATORN high-perf. SC drill ULTRA M HPC 3xD 10.2 mm x 12 mm x 102 mm HA internal
Brand: ATORN
Surface: ULTRA M
Length: 102 mm
DIN: 6537
Art.-no. 11142102
Manufacturer article no. 10481590
EAN 4050293572667
Individual prices for customers after login
Application
For HPC boring in stainless steel, titanium alloys, nickel alloys and special alloys.
Execution
- Solid carbide high-performance drill ULTRA M
- 2 drill heels
- 4 grinding faces
- 30° spiral angle
- Straight main cutting edge
Advantage
- innovative cutting geometry with extremely effective cutting edge
- newly developed form-fitting ULTRA M coating for improved service life
- Cutting edge preparation minimises micro-fractures on the cutter
Brand | ATORN |
Cutting edge diameter | 10.20 mm |
Main EAN Code | 4050293572667 |
Manufacturer Part Number | 10481590 |
Tolerance of cutting edge diameter | m7 |
Cutting material | SC |
Surface | ULTRA M |
Max. drilling depth (D) | 3xD |
Type | HPC VA |
Coolant supply | Internal |
Tool holding device | HA parallel shank |
Angle of the tip | 140 Degree |
Shank diameter | 12 mm |
Chip flute length | 55 mm |
Length | 102 mm |
f stainless steel | 0.15 mm/r |
DIN | 6537 |
Gross Weight | 0.108 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | f [mm/r] with diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | - | - | |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | - | - | |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | - | - | |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | - | - | |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | - | - | |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | - | - | |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 70-80 | 0.16-0.2 | ⚫ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | - | - | |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | - | - | |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | - | - | |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 50-60 | 0.08-0.1 | ⚫ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 25-35 | 0.08-0.1 | ⚫ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 25-35 | 0.08-0.1 | ⚫ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 25-30 | 0.08-0.1 | ⚫ |
Last viewed
Factory calibration for depth calliper 750–1000 mm
YOKOTA YZ-NP600E-Z 18 V cordless impulse wrench, speed of up to 4,800 rpm, 25 Nm
ATORN solid carbide drill UNI TiAlNplus 5xD without IC 9.1 mm straight shank HB
RED ROOSTER pneumatic impact wrench RRI-2500
Zoller EASYTAG data holder HSK 40, green
ARIANA 1/2" check valve, 2 units
ATORN recessing blade ABE-N 32-ADE04-C
WIHA 1/4 inch TX bit shape C 6.3 T 7 25 mm version Z
ORION die HSS EN 22568 MF 20x1 6g outer diameter 45 mm
ANKE workbench model 282 V panel zinc sheet ctg., 2000x700x900 mm, RAL 7035/5010