ATORN milling cutter holder BT40 (ISO 7388-2) dia. 8 mm A=102 mm
Brand: ATORN
Length: 75 mm
Art.-no. 23161707
Manufacturer article no. 22660982
EAN 4050293713978
Individual prices for customers after login
Application
For accommodating threaded screw-in milling cutters.
Execution
- Taper angle tolerance AT3
- Concentricity < 0.005 mm
Notes
The previous standard JIS B 6339 MAS BT was superseded by ISO 7388-2.
Delivery
1x BT40 milling cutter holder (ISO 7388-2)
 | |
Brand | ATORN |
Tool holding device | BT 40 |
Suitable for thread (G) | M8 |
Adapter diameter (d1) | 8.5 mm |
Tapered diameter (d2) | 13 mm |
Outer diameter (D) | 23 mm |
Projecting length (A) | 102 mm |
Length (L1) | 75 mm |
Last viewed
BOSCH GSR 12V-35 FC cordl drill/driver bare unit GFA L-BOXX, 20+1 torque levels
ANKE workbench model 125 V 2000x700x850 mm panel zinc sheet coat., RAL 7035/7016
ORION clamping head SK42 w. extension, diameter 27.0 mm, w/ long./trans. grvs
ATORN high-perf. SC ALU drill HPC 5xD 4.0 mm x 6 mm x 74 mm HA internal
drawer, 330mm/130mm, full ext., 100 kg, RAL 7035/7016 for 550 B int.: 900x450mm
HAZET long 3/8 inch socket 9 mm DIN 3124 with bi-hexagon
ATORN HPC reamer, SC TiAlN, T=4, 0° 6.0mm H7 x 75mm x 12mm HA (steel)
ATORN high-perf. SC drill ULTRA M HPC 3xD 11.0 mm x 12 mm x 102 mm HA internal
ATORN test pin set, gauge steel, TK1, 6.01-7.00 mm in 0.01 mm increments
ATORN tool trolley RAL 7035/5010, 7 fully extending drawers, perforated sidewall