ATORN pull stud BT40 60° with hole 4 mm
Brand: ATORN
Length: 60 mm
Art.-no. 23693051
Manufacturer article no. 20800041
EAN 4050293200706
Individual prices for customers after login
Application
For screwing into tool holders. They differ depending on the machine and spindle type and are used to fix the holders in the machine spindle.
Execution
- All pull studs made from material 16Mn Cr5
- Case-hardened HRc 58 ± 2
- Thread and bore hole soft, black oxide and polished
- Pull studs with O-ring = sealed
- Ref. no. 050 with hole for IC
Ref. no. 60-62 without IC
Notes
Further versions available on request (specification of machine types required).
Delivery
1x BT pull stud 60°
 | |
Brand | ATORN |
Suitable for tool holding device | SK 40 |
Design | With O-ring |
Outer diameter (D1) | 10 mm |
Bolt diameter (D2) | 17 mm |
Diameter (D) | 15 mm |
Length (L) | 60 mm |
Coolant supply | Yes |
Angle (α/ A) | 60 Degree |
Length of tenon (L1) | 35 mm |
Last viewed
RHODIUS diamond cutting disc 125 x 12 x 2.2 x 22.23 mm
ORION solid carbide finishing cutter diameter 6x15x42x80 mm T=6 HA
Roller set f.dump.body 2 steering a.2 fixed cast.of solid rub.diam. 200x50mm
ALFRA cemented carbide keyhole saws 40 mm
DIEBOLD UltraGrip3.0 power chuck SK40 diameter 32 A 105 mm
FAHRION sealing washers for internal cooling HP16-DI 9.00 mm 426 E
WIDIA indexable milling insert XDET16M530FRALP WN10HM VHSC-16
MUNK GÜNZBURGER clip-step retrofit kit for 12 step leaning ladder
ORION end mill HSSE5 DIN 844N long 10.0 mm shank DIN 1835D HSSE5
LISTA Anti-roll-off edging, 3-sided 64x36E (WxDxH) 1193x725x20mm