ATORN pull stud BT40 60° without hole
Brand: ATORN
Length: 60 mm
Art.-no. 23693061
Manufacturer article no. 20800011
EAN 4050293200799
Individual prices for customers after login
Application
For screwing into tool holders. They differ depending on the machine and spindle type and are used to fix the holders in the machine spindle.
Execution
- All pull studs made from material 16Mn Cr5
- Case-hardened HRc 58 ± 2
- Thread and bore hole soft, black oxide and polished
- Pull studs with O-ring = sealed
- Ref. no. 050 with hole for IC
Ref. no. 60-62 without IC
Notes
Further versions available on request (specification of machine types required).
Delivery
1x BT pull stud 60°
 | |
Brand | ATORN |
Suitable for tool holding device | SK 40 |
Design | With O-ring |
Outer diameter (D1) | 10 mm |
Bolt diameter (D2) | 17 mm |
Diameter (D) | 15 mm |
Length (L) | 60 mm |
Coolant supply | No |
Angle (α/ A) | 60 Degree |
Length of tenon (L1) | 35 mm |
Last viewed
MITUTOYO digital micrometer with deep bracket, 0-1 inch, bracket 12 inches
ORION high-perf. drill, SC TiAlN, HPC 3xD 16.5 mm x 18 mm x 123 mm HB external
ATORN cylinder wire brush 50 mm diameter, shank 6 mm crimped V2A wire 0.30 mm
ORION subland stepped drill bit type N, HSS medium quality grade M8 15 mm HA
ATORN SK50 collet chuck (DIN 2080) OZ (4-32 mm) A=73 mm
ANKE workb., mod. 120 V, panel w. zn. coatg. 2000 x 700 x 900 mm RAL 7035/5010
ATORN shrink-fit chuck 3° HSK63 (ISO 12164) dia. 10 mm A=160 mm
ATORN screw tap HSSE C DIN 376 40° M20 2.5mm ISO2 S≤2.5xD des. P
ATORN mini cutting insert AFL 4.0mm B0.75 L15 HC5640
EROGLU hydraulic expansion chuck HSK-A40-12-80