ATORN pull stud BT50 60° with hole 6 mm
Brand: ATORN
Length: 85 mm
Art.-no. 23693052
Manufacturer article no. 20800043
EAN 4050293200713
Individual prices for customers after login
Application
For screwing into tool holders. They differ depending on the machine and spindle type and are used to fix the holders in the machine spindle.
Execution
- All pull studs made from material 16Mn Cr5
- Case-hardened HRc 58 ± 2
- Thread and bore hole soft, black oxide and polished
- Pull studs with O-ring = sealed
- Ref. no. 050 with hole for IC
Ref. no. 60-62 without IC
Notes
Further versions available on request (specification of machine types required).
Delivery
1x BT pull stud 60°
 | |
Brand | ATORN |
Suitable for tool holding device | SK 50 |
Design | With O-ring |
Outer diameter (D1) | 17 mm |
Bolt diameter (D2) | 25 mm |
Diameter (D) | 23 mm |
Length (L) | 85 mm |
Coolant supply | Yes |
Angle (α/ A) | 60 Degree |
Length of tenon (L1) | 45 mm |
Last viewed
DIEBOLD TubeChiller US1100 vertical cooling unit 400 V/16 A/11 kW
tyre set for self-tipping and tilting containers, load capacity up to 1500 kg
BIAX PNEUMATIC BE 309 straight bore deburring tool with hose 1,500 mm
ORION thread plug gauge UNF 1/4 inch - 28 threads/inch class 2B
Drawer, 270 mm/130 mm, full ext., 200 kg, RAL 7035/5010 for 800 B int.: 900x700 mm
DAkkS calibration without sticker torque 2–1000 Nm triggers right
DAkkS calibration without sticker graduated scales and steel rulers 0–500 mm
ATORN electronics pliers set, 6 pieces in zip bag
LISTA drawer cabinet 45x36E 850x870x725 mm RFID Lock RAL7035 with 7 drawers
DAkkS calibration limited shaft slot gauge 100 - 200 mm