ATORN pull stud DIN 69872 A, SK30, with hole
Brand: ATORN
Length: 44 mm
DIN: 69872
Art.-no. 23690130
Manufacturer article no. 20800001
EAN 4050293200591
Individual prices for customers after login
Application
For tools with steep taper in accordance with ISO 7388-1 (former standard was DIN 69871) and ISO 7388-2 (old standard was JIS B 6339 MAS-BT).
Execution
- All pull studs made from material 16Mn Cr5
- Case-hardened HRc 58 ± 2
- Thread and bore hole soft, black oxide and polished
- Pull studs with O-ring = sealed
Notes
Further versions available on request (specification of machine types required).
Delivery
1x SK pull stud ISO 7388-1
 | |
Brand | ATORN |
Suitable for tool holding device | SK 30 |
Form | A |
Outer diameter (D1) | 13 mm |
Bolt diameter (D2) | 9 mm |
Diameter (D) | 13 mm |
Suitable for screw thread (d5) | M12 |
Length (L) | 44 mm |
Coolant supply | Yes |
Angle (α/ A) | 15 Degree |
Length of tenon (L1) | 24 mm |
DIN | 69872 |
Last viewed
ATORN twist drill U4 HSSE, DIN 338, 1.3 mm x 38 mm x 16 mm, 118°
LEITECH thread insert M 9 x 0.75 - 6H no go
RasterPlan perforated panel 500x450 mm RAL 9010
ALFRA tension bolt 19.0 x 6.0 mm for hydraulic punch
Factory calibration for tape measure 8 m
ORION collet chuck 185E (F66) DIN 6343 RD 7.0 mm smooth
eepos module XS/S Harting 6B suitable for XS2 and S4 500V/16A feed
ATORN high-perf. SC ALU drill HPC 5xD 17.0 mm x 18 mm x 143 mm HA internal
ORION high-perf. drill, SC TiNAlOX, HPC 3xD 12.5 mm x 14 mm x 107 mm HB external
KIENINGER cemented carbide indexable insert WPR-N 12 mm LC240Q/P40-TiCrN