ATORN pull stud DIN 69872 B SK30, without hole
Brand: ATORN
Length: 44 mm
DIN: 69872
Art.-no. 23692130
Manufacturer article no. 20800010
EAN 4050293200621
Individual prices for customers after login
Application
For tools with steep taper in accordance with ISO 7388-1 (former standard was DIN 69871) and ISO 7388-2 (old standard was JIS B 6339 MAS-BT).
Execution
- All pull studs made from material 16Mn Cr5
- Case-hardened HRc 58 ± 2
- Thread and bore hole soft, black oxide and polished
- Pull studs with O-ring = sealed
Notes
Further versions available on request (specification of machine types required).
Delivery
1x SK pull stud ISO 7388-1
 | |
Brand | ATORN |
Suitable for tool holding device | SK 30 |
Form | B |
Outer diameter (D1) | 13 mm |
Bolt diameter (D2) | 9 mm |
Diameter (D) | 13 mm |
Suitable for screw thread (d5) | M12 |
Length (L) | 44 mm |
Coolant supply | No |
Angle (α/ A) | 15 Degree |
Length of tenon (L1) | 24 mm |
DIN | 69872 |
Last viewed
RHODIUS extra-thin cutting disc 115 x 1.5 x 22.2 mm, depressed centre
QUICK knurl cutter, HSSE-PM, DIN 82 RGE 30°, 21.5 mm, 1.2 mm, uncoated
AMF L-shaped hex key set, 14 pieces, 0.05-9/16 inch in bag
H+S feeler gauge tape INOX 1.00 mm reel 12.7 mm x 5 m
Wing door cabinet, HxWxD 1950x1000x400 mm, doors w viewing window, RAL 7035/7016
ORION SC end mill, diameter 16.0 x 16 x 36 x 92 mm, HB shaft
TEKA activated carbon filter, 1 piece, for FILTOO filter system
ATORN twist drill TLP HSSE-TiAlN, DIN 340, 2.9 mm x 100 mm x 66 mm, 130°
ATORN thread cutting inserts, full profile 60° HC5615 11 (ER/EL) 0.8 ISO, right
ORION high-perf. drill bit SC TiNAlOX HPC 5xD 9.7 x 10 x 103 mm HB shank with IC