ATORN pull stud DIN 69872 B SK40, without hole
Brand: ATORN
Length: 54 mm
DIN: 69872
Art.-no. 23692140
Manufacturer article no. 20800003
EAN 4050293200638
Individual prices for customers after login
Application
For tools with steep taper in accordance with ISO 7388-1 (former standard was DIN 69871) and ISO 7388-2 (old standard was JIS B 6339 MAS-BT).
Execution
- All pull studs made from material 16Mn Cr5
- Case-hardened HRc 58 ± 2
- Thread and bore hole soft, black oxide and polished
- Pull studs with O-ring = sealed
Notes
Further versions available on request (specification of machine types required).
Delivery
1x SK pull stud ISO 7388-1
 | |
Brand | ATORN |
Suitable for tool holding device | SK 40 |
Form | B |
Outer diameter (D1) | 19 mm |
Bolt diameter (D2) | 14 mm |
Diameter (D) | 17 mm |
Suitable for screw thread (d5) | M16 |
Length (L) | 54 mm |
Coolant supply | No |
Angle (α/ A) | 15 Degree |
Length of tenon (L1) | 26 mm |
DIN | 69872 |
Last viewed
ATORN countersink, 60°, HSSE, single-bld cutter, T=1, 1.0-5.0 mm, 50 x 5 mm HA
Smooth jaw, 3.5 mm, hardened, accessories for KCS 5A 100
ATORN MVVN clamp holder, negative, neutral, MVVN N 2525 M16
ATORN SC mini end mill, long, diameter 0.4 x 0.6 x 3 x 50 mm T=2 RT65
EXPO 225 mini tilting container, colour: flame red RAL 3000
Mitutoyo micrometer head MB 15 mm 149-802-10
fetra steel sack truck with vertical struts, shovel 400 x 150 mm, PU tyres
HK mounting bracket set for HK workstation light no. 50239160-165
GEDORE slide hammer, length 180 mm, impact weight 200 g
Mitutoyo ID-S 12.7 mm/0.5 inch 0.001 mm/0.00005 inch IP 53, back panel w. eyelet