ATORN pull stud SK40 Mori-Seiki with internal cooling
Brand: ATORN
Length: 54 mm
Art.-no. 23693001
Manufacturer article no. 20803250
EAN 4050293569407
Individual prices for customers after login
Application
For screwing into tool holders. They differ depending on the machine and spindle type and are used to fix the holders in the machine spindle.
Execution
- All pull studs made from material 16Mn Cr5
- Case-hardened HRc 58 ± 2
- Thread and bore hole soft, black oxide and polished
- Pull studs with O-ring = sealed
Notes
Further versions available on request (specification of machine types required).
Delivery
1x Mori-Seiki SK40 pull stud
 | |
Brand | ATORN |
Suitable for tool holding device | SK 40 |
Design | With O-ring |
Outer diameter (D1) | 14 mm |
Bolt diameter (D2) | 17 mm |
Diameter (D) | 19 mm |
Length (L) | 54 mm |
Coolant supply | Yes |
Angle (α/ A) | 15 Degree |
Length of tenon (L1) | 26 mm |
Last viewed
eepos carbon slewing crane set 2500
ANKE workbench model 286 V panel zinc sheet ctg., 2000x700x850 mm, RAL 7035/7016
LISTA workbench 27x36E (WxDxH) 2000x750x890 mm multiplex RFID lock RAL 7035
ORION steel gauge block tolerance class 0 1.90 mm
ORION ceramic gauge block tolerance class 0 1.49 mm
ORION end mill HSSE8 DIN 844N short 2.0 mm shank DIN 1835B
HK guide roller 200 mm with locking device
WIDIA VariDrill high-perf. drill, SC-TiAlN 8xD 1.6mm x 4mm x 58mm HA internal
ATORN twist drill HSSE-V3 TiAlN 5XD 12.4 x 12 mm x 151 mm
ATORN SC end mill T2 diameter 10.0 x 10 x 35 x 88 mm W0 degrees SP