ATORN shrink-fit chuck HSK63 (ISO 12164) dia. 18 mm A=120 mm
Brand: ATORN
Art.-no. 23419118
Manufacturer article no. 21041074
EAN 4050293358070
Individual prices for customers after login
Application
For clamping cutters and drills with straight shank with h6 tolerance. Suitable for shrinking onto inductive contact and hot air devices.
Execution
- Heat-resistant and high-temperature tool steel 1,600-1,800 N/mm²
- Hardness 52 + 2 HRC
- Maximum coolant pressure 80 bar
- Adjustment travel 10 mm, can be adjusted on both sides
- Shrink grip and shrink release of carbide and HSS tools
- 4 additional drill holes for fine balancing
- With Balluff chip hole
Advantage
- High positioning and repeat accuracy
- Ideal for high rotation speeds
- Slim design with minimal interference contour
- Very high torque transfer
- Ideal for HSC machining
Notes
The previous standard DIN 69871 was superseded by ISO 12164.
Delivery
1x HSK63 shrink-fit chuck (ISO 12164)
 | |
Brand | ATORN |
Tool holding device | HSK 63 |
Clamping diameter (d) | 18 mm |
Projecting length (A) | 120 mm |
Tapered diameter (d2) | 33 mm |
Diameter (d3) | 42 mm |
Clamp in depth (l2) | 50 mm |
Suitable for thread ( G) | M12 x 1 |
Max. adjustment travel (V) | 10 mm |
Concentricity tolerance | 0.003 mm |
Coolant supply | Internal axial |
Balancing quality | G 2.5 at 25,000 rpm |
Last viewed
ATORN solid carbide drill UNI TiAlNplus 5xD with IC 12.2 mm straight shank HB
ATORN combination wrench 10 mm DIN 3113 A
BOSCH Sägeblätterführung, 70 mm Nr.2608135023
ORION high-perf. drill, SC TiAlN, HPC 5xD 5.55 mm x 6 mm x 82 mm HB internal
ORTLIEB Rubber Flex collet J 115, clamping range 1.0-2.5 mm
HAZET double open-end wrench 32 x 36 mm DIN 3110
BILZ reverse counterbore, 180° pilot, HSS, 48.0 mm x 19 mm, T=4
ORION high-perf. drill, SC TiNAlOX, HPC 3xD 10.8 mm x 12 mm x 102 mm HB external
HAZET insulated 3/8 inch socket TX40
ATORN mini cutting insert APL 3.0mm R0.2 L22 HW5615 11.99