ATORN shrink-fit chuck HSK63 (ISO 12164) dia. 6 mm A=120 mm
Brand: ATORN
Art.-no. 23419106
Manufacturer article no. 21041068
EAN 4050293358018
Individual prices for customers after login
Application
For clamping cutters and drills with straight shank with h6 tolerance. Suitable for shrinking onto inductive contact and hot air devices.
Execution
- Heat-resistant and high-temperature tool steel 1,600-1,800 N/mm²
- Hardness 52 + 2 HRC
- Maximum coolant pressure 80 bar
- Adjustment travel 10 mm, can be adjusted on both sides
- Shrink grip and shrink release of carbide and HSS tools
- 4 additional drill holes for fine balancing
- With Balluff chip hole
Advantage
- High positioning and repeat accuracy
- Ideal for high rotation speeds
- Slim design with minimal interference contour
- Very high torque transfer
- Ideal for HSC machining
Notes
The previous standard DIN 69871 was superseded by ISO 12164.
Delivery
1x HSK63 shrink-fit chuck (ISO 12164)
 | |
Brand | ATORN |
Tool holding device | HSK 63 |
Clamping diameter (d) | 6 mm |
Projecting length (A) | 120 mm |
Tapered diameter (d2) | 21 mm |
Diameter (d3) | 27 mm |
Clamp in depth (l2) | 36 mm |
Suitable for thread ( G) | M5 |
Max. adjustment travel (V) | 10 mm |
Concentricity tolerance | 0.003 mm |
Coolant supply | Internal axial |
Balancing quality | G 2.5 at 25,000 rpm |
Last viewed
VARIOFIT sw-600.503 table trolley with two load areas and two drawers
Extension sleeve MK 1/2 DIN 2187 hardened
ATORN ER32 UP collet dia. 3.5 mm (3.5-3.0 mm) concentricity 2 µm
Heavy-load shelf for pallet storage, shelf 950x1300 mm, 250 kg, RAL 7035
Waste collector, triple-section, 96x37x78 cm, yellow/blue/black
ATORN solid carbide drill UNI TiAlNplus 5xD with IC 9.9 mm straight shank HA
AUTOSTAT 77003135 bolt original spare part
EWO cleaning graters, various diameters
ATORN cut-off and grooving blade ABE-N 32-ASS03
TESTO 540 Luxmeter illum. meas instr., meas range 0-99999 lux meas cycle 0.5 s