Brand: ATORN
DIN: 50100
Material: Steel, stainless
Art.-no. 44181675
Manufacturer article no. 41615047
EAN 4050293715576
Individual prices for customers after login
Application
The electric torque recorders in the DM1 model series are ideal for measuring static reaction torque.
Execution
- Robust design with standard square connection
- Incl. TEDS module (electronically stored data sheet)
- Pre-assembled with 3-m cables and connector configuration according to ATORN display unit ZD3
- Incl. factory calibration certificate
Advantage
- Force sensor is automatically detected by the ATORN display unit ZD3
- All relevant data is loaded from the TEDS module into the ATORN display unit ZD3, thus no additional settings are required on the display unit
- If replacement is required, the measuring instrument does not need to be sent in
- Ideal for permanent installation due to the high rigidity and accuracy
- Torque absorption on both sides, for e.g. torque tests (load/relief)
Notes
TEDS = Transducer Electronic Data Sheet according to IEEE 1451.4. An electronic data sheet stored in the force sensor, which contains all relevant data.
Delivery
Torque recorder with 3-m connection cable and measuring instrument plug, factory calibration certificate
Model | DM1 |
Tip size | 1 1/2 inch |
Design | TEDS module integrated |
Outer diameter | 100 mm |
DIN | 50100 |
Overall height | 250 mm |
Min./max. torque measuring range | 0-5000 Nm |
Min./max. nominal range of the supply voltage | 5-10 V |
Rated output | 1 mV |
Zero signal when mounted | 0.01 mV |
Relative linearity deviation | ≤± 0.020 % |
Relative span in unchanged installation position | ≤± 0.020 % |
Cable length | 3 m |
IP protection class | IP 64 |
Max. supply voltage | 15 V |
Material | Steel, stainless |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!