ATORN vac clamping system VAC-MAT set VM3 600 x 400 x 32.5 grid spacing 12.5 mm

Application

For clamping workpieces by means of vacuum. Wide range of workpiece shapes can be clamped. For grinding, milling, drilling and 5-sided machining including all breakouts. VAC-MAT is a thin, soft plastic mat with 77 vacuum holes, suction cups in various sizes with elastic lips on the top and fine bore holes in the centre. The underside features protruding plastic lugs for positioning the VAC-MAT on the vacuum clamping plate.

Execution

• Since no sealing cords need to be inserted, setup times are significantly reduced and workpieces can be reclamped within a few seconds
• Gentle contact surface against the workpiece prevents clamping surfaces from being damaged
• Prevents surfaces from getting scratched
• No special equipment required
• The elastic sealing cords fill any uneven areas on the workpiece clamping surface. The sealing cord can compensate for up to 0.5 mm of unevenness or curvature
• The modular design allows multiple vacuum plates to be connected across the grid. The operating vacuum to the individual plates is routed through the fasteners

Advantage

• High retention forces
• Clamping surface with high coefficient of friction
• External and internal contours can be milled through
• The possibility of milling or drilling into the mat ensures precise and clean workpiece cutting edges without burrs
• Universal clamping system for a wide range of workpieces

Delivery

1x VAC-MAT modular plate, 1x adapter plate, 10x blue VAC-MAT mats, 2x adjustable clamps, 1x assembly tool, 10 m black vacuum sealing cord dia. 4 mm, 1 m vacuum wire spiral hose