For detailed information, other images and documents, please select individual articles from the following table.
With Venturi vacuum generator for dry machining
Products
Application
For simple geometric workpieces with rough shapes without breakouts or large breakouts that can be sealed with sealing cords (size must be a multiple of the grid).
Execution
- Simple vacuum generation using compressed air. The built-in vacuum pumps (Venturi system) require an operating pressure of 3.5-6 bar
- The final vacuum is 80 mbar absolute (92 % vacuum)
- A built-in silencer in the vacuum plate reduces the noise of the escaping air
- The plates can be operated either with the integrated Venturi nozzle or with a vacuum pump. A suitable tool is supplied
- All grid vacuum plates can also be connected to conventional vacuum pump no. 24501 110 or no. 24501 120.
Advantage
- The elastic sealing cords fill and even out minor irregularities and curvatures
- Good sealing, also suitable for rough (e.g. sawn) surfaces
- High retention forces, especially suitable for heavy machining such as milling and grinding
Notes
Conversion set for wet machining included in scope of delivery. A vacuum pump is also needed for wet machining.
Delivery
1 vacuum grid plate, 2 adjustable clamps, 3 m pneumatic hose, 10 m vacuum sealing cord diameter 4 mm black, 1 vacuum generator (Venturi nozzle)
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!