For detailed information, other images and documents, please select individual articles from the following table.
Internal precision measuring instrument for grooves and recesses
ONM series
Products
Application
For measuring grooves and recess diameters by inserting the probe through a larger opening. Please note the maximum retraction or expansion area. If you have any questions, please send us a drawing or sketch with details of the larger opening, measuring depth and recess diameter with tolerance and recess width (B)
Execution
- Supplied without basic unit/holder, please refer to article number 33576010
- ONM expansion probe with carbide-tipped wedge needle, without fixed measuring contact (callipers); the required measuring contacts (callipers) are available on request and start at 20 mm, increasing in increments of 5 mm as standard, up to 55 mm (ONM 20-55); or starting at 40 mm, increasing in increments of 5 mm as standard, up to 200 mm (ONM 40-200/10 and ONM 40-200/20).
Advantage
- Rapid measurement of groove/recess diameters in bores
- High measuring pressure ensures reliable measurement
- Especially suitable for series measurement
Notes
IMPORTANT: The measuring instrument will not work without the basic unit (33576010) and the measuring contact (ONM only). A dial gauge/precision pointer and an adjustment tool are also required.
We recommend including a drawing/sketch with your request
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!