DIEBOLD shrink-fit chuck A 160 SK 40 x 10 mm DIN 69871 AD
Brand: DIEBOLD
Art.-no. 23425562
Individual prices for customers after login
Application
For precise clamping of tools with straight shank h6.
Execution
- Concentricity tolerance of hollow shank taper for location hole dia.< 0.003 mm.
- Clamping diameter for h6 shank tolerance.
- For higher speeds, fine balancing is necessary.
- Required pull stud no. 23690.
Notes
The previous standard DIN 69871-1 was replaced by ISO 7388-1.
Delivery
1x shrink-fit chuck in accordance with ISO 7388-1 (DIN 69871).
 | |
Brand | DIEBOLD |
Tool holding device | SK 40 |
Clamping diameter (d) | 10 mm |
Projecting length (A) | 160 mm |
Tapered diameter (d2) | 24 mm |
Clamp in depth (min. L2) | 42 mm |
Form | AD |
Max. adjustment travel (max. V) | 10 mm |
Concentricity tolerance | 0.003 mm |
Coolant supply | Internal axial |
Balancing quality | G 2.5 at 25,000 rpm |
Harmonized System Code | 84661038 |
Gross Weight | 1.400 kg |
Last viewed
PFERD Polinox PNL mounted points, 60 x 50 mm, grain 180
ORION draw-in collet chuck 355E (L20) DIN 6341 round 8.0 mm smooth
ATORN SC TiAlSiN HPC hard drill 3xD Ø 10.8 mm x 12 mm x 102 mm HA external
DIEBOLD tool holder adapter SK50/CAT50/BT50 access. vertical heat-shrink units
Leather protective gloves CHAMP 2, size 10
BOSCH jigsaw blades 5 pieces 2 608 631 017 T 127 D
ATORN installation key SW24 length 215 mm special width 4.8 mm
Pt100 digital hardwired temperature sensor, measuring range -85 to 150 degrees
Ass. trol. pull-o. f. trays, incl. 6 w. dwrs. 1500 x 750 mm, mplex. bch. 40 mm
HK undercounter cab. GS 6, 800x570x680 mm w. 6 fully ext. drawers, RAL 7035/7016