DIEBOLD shrink-fit chuck SK 40 x 18 mm DIN 69871 AD
Brand: DIEBOLD
Art.-no. 23425519
Manufacturer article no. 72.060.500.570
Individual prices for customers after login
Application
For precise clamping of tools with straight shank h6.
Execution
- Concentricity tolerance of hollow shank taper for location hole dia.< 0.003 mm.
- Clamping diameter for h6 shank tolerance.
- For higher speeds, fine balancing is necessary.
- Required pull stud no. 23690.
Notes
The previous standard DIN 69871-1 was replaced by ISO 7388-1.
Delivery
1x shrink-fit chuck in accordance with ISO 7388-1 (DIN 69871).
 | |
Brand | DIEBOLD |
Manufacturer Part Number | 72.060.500.570 |
Tool holding device | SK 40 |
Clamping diameter (d) | 18 mm |
Projecting length (A) | 80 mm |
Tapered diameter (d2) | 33 mm |
Clamp in depth (min. L2) | 50 mm |
Form | AD |
Concentricity tolerance | 0.003 mm |
Max. adjustment travel (max. V) | 10 mm |
Coolant supply | Internal axial |
Balancing quality | G 2.5 at 25,000 rpm |
Product Group | 297 |
Gross Weight | 0.080 kg |
Last viewed
ATORN multi-twist drill DIN 338 11.5 mmx142 mm x94 mm, 135°, 3 clamping surfaces
SCANGRIP stand for NOVA lamps 1 - 3 m
ATORN SC HPC TiAlN interch. head reamer TH 10.0 mm H7 steel/cast iron geometry
METABO R12-18 cordless DAB+/BT AM/FM construction site radio,plug-in mains cable
PRO FIT safety goggles Viper
ORION draw-in collet chuck 355E (L20) DIN 6341 round 7.0 mm smooth
Pipe cutter 6 - 76 mm for synthetic and compound pipes with deburrer
LEITECH thread insert UNC 6-32 GO
ATORN SC radius cutter diameter 6.0x6x60x100mm T2 HA ULTRA DC coated
ANSMANN battery charger model Comfort Multi