ELCOMETER layer thickness gauge A456C, type T, for separate FNF probes
Brand: ELCOMETER
Art.-no. 45800625
Manufacturer article no. A456CFNFTS
Individual prices for customers after login
Application
For measuring non-magnetic coatings (paints, plastics, chrome, copper, zinc etc.) on magnetic substrates and for measuring non-conductive coatings (paints, plastics etc.) on non-metallic substrates (copper, aluminium, zinc, bronze, brass, etc.)
Execution
- Robust ABS plastic housing
- Large, easy-to-read 2.4" colour display
- Degree of protection: IP 64, dust-proof and water-resistant
- Data logging, concave from R=2 and convex from R=25
- Connection for FNF combination sensor for ferrous (F) and/or non-ferrous (NF) metal substrates
Advantage
- Fast samplings rates of over 70 measurements per minute
- Various calibration methods stored
- View and delete measured values and batches
- Alphanumeric batch names entered into device by user
- Scanning and auto repeat mode with connected ultra/scan probe
Notes
Probes not included in scope of delivery. For suitable probes, see 45800 650-665.
Delivery
Measuring instrument, hand strap, transport case, screen protector, USB cable, ElcoMaster 2.0™ software, 2x AA batteries, operating instructions
Brand | ELCOMETER |
Manufacturer Part Number | A456CFNFTS |
Model | A456CFNFTS |
Type | T |
Probe design | FNF |
Test probe | Separately |
Min./max. layer thickness display range | 0-31 mm |
Layer thickness resolution | < 100 µm: 0.1 µm |
Measuring rate | > 70 measurements/min |
Data transmission type | USB/Bluetooth |
Internal memory | 150000 measured values |
Adjustable limit values | Yes |
Calibration memory type | Gauge & batch |
Calibration methods | One-point calibration, Two-point calibration, Null-offset according to ISO 19840, Reset to factory calibration |
Harmonized System Code | 90318080 |
Gross Weight | 1.500 kg |
Last viewed
ORION SC end mill, 45 degrees, TiAlN 4.0x11x57 mm shaft DIN 6535HA T=4
ATORN bandsaw blade bi-metal UNI M42 5400 x 41 x 1.1 mm 3/4
ORION indexable insert, negative, WNMG 080404-MU OHC7635
Thread milling cutter single-edge cutter sub-profile 60° 0.5-0.8 mm 2.45 mm
ORION end mill HSSE5 NF DIN 844, short, 6.0 mm shank DIN 1835B, type NF
ORION high-perf. drill, SC TiAlN, HPC 3xD 6.4 mm x 8 mm x 79 mm HB internal
ATORN NC reamer HSSE T=3 B 7-8° 1.42-1.50x 40x8mm HA sim. to DIN 212 opt. 0.01
KLINGSPOR sanding discs, grain 80, for adhesive grinding discs, 115 mm
ATORN solid carbide drill UNI TiAlNplus 5xD with IC 3.85 mm straight shank HB
ORION high-perf. drill bit SC TiNAlOX HPC 5xD 15.2 x 16 x 133 mm HB shank w. IC