EROGLU shrink-fit chuck HSK-A40-10-80
Brand: EROGLU
Art.-no. 23153015
Manufacturer article no. A40.25.10.80
EAN 4250122623168
Individual prices for customers after login
Application
To accommodate tools with a straight shank
Execution
- For dia. 3, 4 and 5 mm, use only carbide shanks
- Mounts suitable for inductive, contact and hot air heat-shrink units
- Alloyed case-hardening steel with a core tensile strength of at least 950 N/mm²
- Case-hardened HRC 58 ± 2, hardness depth 0.6 mm ± +0.2 mm
- Taper angle tolerance quality in accordance with the applicable standard
- Ra 0.3 taper surface quality
- Hole for data carrier DIN 69873 in the collar
- Black oxide surface
Notes
Previous standard DIN 69893
Delivery
1x HSK-A40 shrink-fit chuck, without adjusting screw
 | |
Brand | EROGLU |
Main EAN Code | 4250122623168 |
Manufacturer Part Number | A40.25.10.80 |
Tool holding device | HSK A40 |
Tool holding device type | Shrink chuck |
Form | A |
Diameter (d) | 10 mm |
Projecting length (A) | 80 mm |
Diameter 2 (D) | 80 mm |
Diameter 3 (D1) | 32 mm |
Collar diameter | 40 mm |
Length 2 (L2) | 42 mm |
Coolant supply | Internal axial |
Balancing quality | G 2.5 at 25,000 rpm |
Gross Weight | 0.470 kg |
Last viewed
MAHR cable f. MAHR length measuring probe P1300, length 5 metres, 0°, straight
ATORN HPC POWER SC groove end mill, UNI, 11.7 x 12 x 28 x 73 mm HA, type N short
ATORN NC reamer HSSE T=8 D 7-8° 14.01-14.50x 162x50mm HA sim. DIN 212, opt.
ATORN SC HPC end mill diameter 10.0 x 22 x 32 x 72 mm, HB shaft
WERA torque screwdriver Kraftform Safe-Torque set, 2-6 Nm, 16 pcs
ATORN wire end brush, dia. 10 x 40 mm, shank 6 mm, crimped V2A wire, 0.3 mm
ORION SC end mill teeth=3 diameter 5.0x13x57mm 45 degrees HA shaft TiAlN |PROMOTION
ATORN SC HSC end mill - G/CFRP diameter 10.0 mm W10 degrees L:72x25 t:6 d10
BIAX PNEUMATIC TVD 3-100/2 pneumatic straight grinder
WIDIA SC ball nose end mill W4NB, dia. 5x13x18x57 mm, HB shank