METRON PT4000 force sensor, measuring range 0–1000 N
Brand: METRON
Art.-no. 44500011
Manufacturer article no. PT4000 - 1000
Individual prices for customers after login
Application
For force sensing, e.g. on tensile and compressive test machines in combination with measuring and display units, e.g. MMV 22 or MEC-9163.
Execution
- Measurement ranges from 20 kg (200 N) to 5,000 kg (50 KN)
- Steel measuring body, nickel-plated
- Cable length 6 m without connector (unconnected wires)
- 4-conductor technology (input: + red, - black, output: + green, - white)
- IP67 degree of protection
Advantage
- Very high reproducible accuracy: 0.01% of nominal value
Notes
Please note: Compatible plug for display unit and factory calibration certificate on request.
 | |
Brand | METRON |
Manufacturer Part Number | PT4000 - 1000 |
Min./max. force of measuring range | 0-1000 N |
Height | 63.5 mm |
Width | 51 mm |
Depth | 13 mm |
Fastening thread | M8 |
Overload limit | 1.5 x measurement range FN |
Sensitivity of force sensor | 3 mV/V |
Error limit, based on end value | 0.1% |
Min. supply voltage1 | 5 V/AC |
Max. supply voltage | 18 V/AC |
Cable length | 6 m |
Harmonized System Code | 90318080 |
Product Group | 447 |
Gross Weight | 0.400 kg |
Last viewed
HELLERMANN TYTON coloured heat-shrink tubing asmt f. conductors 1-20 mm, 975 pcs
WIDIA cutting body TDMX MS diameter 29.00 mm
ATORN NC reamer HSSE T=6 D 7-8° 7.3mm H7 x 109mm x 31mm HA DIN 212
ATORN claw jaws type KB-G 160 mm with chip breaker 8x5 mm
ATORN wire end ferrule pliers, 180 mm, pol. hd, 2-component handles, 0.25-16 mm²
WIDIA cutting body TDMX MS diameter 32.00 mm
ATORN twist drill VA HSSE, DIN 340, 1.4 mm x 70 mm x 45 mm, 130°
STAHLWILLE handle 510 mm for 3/4 inch ratchet
HILMA Q.I.S. interchangeable jaws with steps, 160 x 54 mm
ATORN SC HPC end mill diameter 5.0 x 13 x 20 x 57 mm, HB shaft